Bose PM8500 Manuale d'uso - Pagina 24

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Bose PM8500. Bose PM8500 44. Configurable professional power amplifier
Anche per Bose PM8500: Scheda tecnica (6 pagine), Istruzioni per l'installazione e la sicurezza (21 pagine)

Bose PM8500 Manuale d'uso
User guide
LEVEL
Output Mute
Output Attenuate
Input Mute
Input Sensitivity
Input Source
Description
Available Controls
Options
LEVEL
Output Mute
Output Attenuate
Input Mute
Input Sensitivity
Input Source
Description
Available Controls
Options
Notes
LEVEL
Output Mute
Output Attenuate
Input Mute
Input Sensitivity
Input Source
Description
Available Controls
Options
Page 24 User Guide
MAIN MENU < LEVEL < OUTPUT ATTEN
This display allows you to attenuate each configured output channel. For channels set to output modes other than Mono, attenuation control is
bound by the configured groupings. Two output channels are displayed at one time. Real-time output is displayed and affected by changing attenu-
ation.
To access Output Atten, use the rotary encoder dial from the LEVEL menu to highlight, then press to select.
Navigation Soft Key: Back to LEVEL menu.
Menu Soft Key #5: Enables channel navigation using the rotary encoder.
Menu Soft Key #1 and #3: Enables the respective output channel to be selected. Use the rotary encoder to select attenuation values in dBFS.
-60dB to 0dB in increments of 0.5dB.
MAIN MENU < LEVEL < INPUT MUTE
This display allows you to mute each input channel.
To access Input Mute, use the rotary encoder dial from the LEVEL menu to highlight, then press to select.
Navigation Soft Key: Back to LEVEL menu.
Rotary Encoder: Continuously scrolls through two input channel pages, allowing users to access Input A-D and Input E-H.
Menu Soft Key #1-4: Toggles the mute state for each channel listed above each button.
Menu Soft Key #5: Enables/disables muting of all channels.
Mute enabled/disabled per channel.
Mute ALL enabled/disabled for all channels.
All input channels can also be muted from the MAIN MENU < METER < INPUT display.
MAIN MENU < LEVEL < INPUT SENS
This display allows you to appropriately match each configured input channel to the incoming signal. This per channel setting corresponds to the
level that will create rated power out of the amplifier, with all other gains through the DSP signal processing chain set to 0 dB (unity gain). For best
noise performance use the highest setting you can, keeping peaks of the input signal as close to the sensitivity level as you can without exceeding
it.
Real-time output is displayed and affected by changing the sensitivity level.
To access Input Sensitivity, use the rotary encoder dial from the LEVEL menu to highlight, then press to select.
Navigation Soft Key: Back to LEVEL menu.
Menu Soft Key #5: Enables the scrolling of four pages of two input channels using the rotary encoder.
Menu Soft Key #1 and #3: Enables the respective input channel to be selected. Use the rotary encoder to select sensitivity values in dBu.
-+0.0 dBu, +4.0dBu, +12dBu, +24dBu
pro.bose.com
English