Drolo Strands Manuale - Pagina 2

Sfoglia online o scarica il pdf Manuale per Pedale musicale Drolo Strands. Drolo Strands 4.

Stampa la pagina
Controls
expression
power
audio
input (TRS)
supply (9v)
output
exp (trs)
repeats
tone
wet
trails
length
fidelity
lfo rand
async
STRANDS
stretch
tape
old
env
rand
LOOP
repeats
Sets the amount of repeats/feedback
tone
A tilt EQ ranging from low pass on the left to hi pass on the right. Neutral at noon.
audio
input
wet/dry
Control the level of the wet and dry signals, with unity gain near the noon position.
length
Overall length of the samples.The exact function of this control varies depending on
the mode you're in. (You can check the modes list for details.)
fidelity
dry
Higher settings offer a higher audio quality but a shorter buffer size, and vice versa.
At lower settings, you might hear some added noise.
direction/rate
exp
The exact function of this control varies depending on the mode you're in. (You can
check the modes list for details.)
direction
(rate)
trails
When engaged, allows the repeats to fade out naturally when the pedal is bypassed. Be
aware that any noise generated by the effect will remain present too when bypassed.
exp
Switch between expression input control over the fidelity or the direction parameter.
mode selector
Switch between the Strand's eight modes.When you select a new mode, the buffer
will be purged, and the loop footswitch will reset to the 'off' position.
On footswitch
Engage the pedal.
Loop footswitch
ON
Loop the current content of the buffer.
Both footswitches can work in momentary or latching mode:
A short tap (< 0.3 seconds) will make the switch act in latching mode.
A longer tap will make it act in momentary mode – reverting to its
previous state after you release the footswitch.