Drolo TWIN PEAKS V5 Manuale di avvio rapido - Pagina 4

Sfoglia online o scarica il pdf Manuale di avvio rapido per Modulatore Drolo TWIN PEAKS V5. Drolo TWIN PEAKS V5 4. Tremolo

exp input:

Can be used to externally control the rate. When an expression pedal is

connected, the rate knob can be used to define the max setting of the

expression pedal.

Most commercially available expression pedals using a TRS plug should

work. The value is not really critical, although I would not go lower than

10k.

Some examples are the Moog EP-2, Roland EV-5, and M-Audio EX-P.

You need to use 1/4 inch TRS (Stereo) plugs and cables. NO MONO

PLUGS OR CABLES! These will short out the voltage regulators inside

the pedal and damage it.

Here is how such a TRS plug looks like.

- tip: controlling pin

- ring: 5V supply voltage

- sleeve : ground

If you really know what you are doing you can actually use a control

voltage instead of a resistance based controller. But you need to consider

the connections and never exceed 5V. If you do you will damage the pedal.

Use a TRS plug. No Mono plug. TRS, not MONO :)

If you have any doubt when deciding what to connect to the expression

input please send me an email and I will verify that everything is safe.

Notes about the pedal placement in your chain:

As with any tremolo pedal, if you are after choppy on/off action, you will

get better results placing it after dirt pedals, although it does a pretty good

job in front of them too.

Given the filtering nature of the harmonic mode, you might find that it

sounds more natural and less dramatic before dirt. Then again, drama

might just be what you're after ;-)

Enjoy your pedal and thanks !

David

http://www.davidrolo.com