DROPSA 999 Series Manuale d'uso e manutenzione - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso e manutenzione per Pompa dell'acqua DROPSA 999 Series. DROPSA 999 Series 15.

1. INTRODUCTION

This user's and maintenance manual refers to a series 999 modular motor-driven gear pump for oil and grease. This

modular pump is particularly suitable for the distribution of oil and grease in lubrication systems.

It is recommended that this manual is carefully kept in good condition and is always available to persons requiring to

consult it.

To request further copies, updates or clarifications with respect to this manual contact the Engineering Department at

Dropsa SpA.

The use of the pump referred to in this manual must be entrusted to qualified personnel with a knowledge of

hydraulics and electrical systems.

The manufacturer reserves the right to update the product and/or the user's manual without the obligation to revise

previous versions. It is however, possible to contact the Engineering Department for the latest revision in use.

The pump, and any accessories mounted on it, should be carefully checked immediately on receipt and in the event of

any discrepancy or complaint the Dropsa SpA Sales Department should be contacted without delay.

DROPSA S.p.A. declines to accept any responsibility for injuries to persons or damage to property in the event of the

non-observance of the information presented in this manual.

Any modification to component parts of the system or the different destination of use of this system or its parts

without prior written authorisation from DROPSA S.p.A. will absolve the latter from any responsibility for injury or

damage to persons and/or property and will release them from all obligations arising from the guarantee.

Instructions for the correct ordering of the required model, and a list of importers, is shown in Section 4.

The features which distinguish this pump are:

 high performance;

 simplicity of construction;

 modularity.

The simplicity of construction guarantees long life, reliability and simplified and reduced maintenance. The modularity

of the components allows the system engineer to construct the lubrication unit to meet the specific needs of the

lubrication system it is serving.

Machine identification yellow label is located on the front side of the reservoir and contains product serial number,

input voltage and details of the operating parameters.

4.1

Electrical system

Piston pump

Electrical power supply

AC ELECTRIC MOTOR

Single phase 220 VAC 50 H2 0.12 KW

3-Phase

220/380 VAC 50 H2 0.18 KW 4 pole

DC ELECTRIC MOTOR

Single phase 24 VDC – 120 W

12 VDC – 100 W