DROPSA PoliPUMP eco Manuale d'uso e manutenzione - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso e manutenzione per Pompa dell'acqua DROPSA PoliPUMP eco. DROPSA PoliPUMP eco 14. Multi-line electric pump for grease

DROPSA PoliPUMP eco Manuale d'uso e manutenzione

1. INTRODUCTION

"PoliPUMP
This operation and maintenance manual refers to
eco" electric pump and contains important information for
the health and safety protection of the personnel who use this equipment.
The most recent version can be obtained by requesting it from the Sales Technical Office or online at
http://www.dropsa.com.
This manual must be read carefully and kept so that it is always available to the operators who want to consult it.

2. GENERAL DESCRIPTION

2.1 DIRECT-POINT LUBRICATION

The PoliPUMP
eco electric pump directly lubricates friction points without needing to use other flow-rate dosing
devices. This allows you to have a product for inexpensive lubrication that is versatile and easy to use.
eco
PoliPUMP
was developed to supply lubrication systems at a single point in vehicles, in installations and in various
types of machinery, for use with grease. Any use other than the use intended shall be deemed to be in non-compliance
with requirements.

2.2 SPECIFICATIONS

The
PoliPUMP eco electric pump is a piston pump driven by an eccentric system, designed to be operated with a
maximum of 35 pumping elements, allowing several independent lines to be supplied.
It is supplied as a standard without pumping elements, which must be ordered separately by choosing the desired flow
between six models that can be identified by pairing different colours. La standard version has a reservoir with a capacity
of 2 litres.
A contoured stirring paddle and reservoir wiper set eliminate the presence of air bubbles in the lubricant contained within
the pump, thereby ensuring proper operation, even at low temperatures.
The pump is driven by a 12 or 24V DC gear motor.

3. PRODUCT IDENTIFICATION

A label is located on the side of the pump that indicates the product part number, the
power supply voltages and the basic features.
3