DROPSA FLOW MASTER II Manuale d'uso e manutenzione - Pagina 7
Sfoglia online o scarica il pdf Manuale d'uso e manutenzione per Strumenti di misura DROPSA FLOW MASTER II. DROPSA FLOW MASTER II 8. Volumetric flow meter for controlling the flow of liquids
Stampa la pagina
12. DIMENSIONS
A (5 lt/min max)
B (20 lt/min max)
Adjustment
By-pass (optional)
43mm
[1.69 in.]
57mm
[2.24 in.]
13. HANDLING AND TRANSPORTATION
Given the low weight and small dimensions of the machine, it is not necessary the use of material handling equipment.
Prior to shipping, the machine is carefully packed in cardboard packing.
During transportation and storage, pay attention to the side on the cardboard packing.
On receipt, check that the packing is not damaged and then, storage the machine in a dry location.
CAUTION: During storage, machine components can withstand temperatures –20 °C ÷ +60 °C (-4 °F ÷ +140 F°).
However, in order to avoid damages, machine starting should occur at a minimum temperature of +5 °C (+41 °F).
14. OPERATING HAZARDS
It is necessary to read carefully about the instructions and the risks involved in the use of lubrication components. The
operator must know machine functioning and dangers through the user manual.
Power supply
Any type of intervention must not be carried out before the unplugging of the machine from the power supply. Make sure that
no one can start it up again during the intervention.
All the installed electric and electronic equipment, reservoirs and basic components must be grounded.
Inflammability
The lubricant generally used in lubrication systems is not normally inflammable. However, it is advised to avoid contact with
extremely hot substances or naked flames.
Pressure
Prior to any intervention, check the absence of residual pressure in any branch of the lubricant circuit as it may cause oil sprays
when disassembling components or fittings.
Noise and vibrations
FLOW MASTER does not produce excessive noise, less than 70 dB(A).
DEPTH
"X"
mm
Module Size
110
121
output GAS 3/8"
UNI ISO 288/1
M5
inlet
lubricant
in.
4.33
4.76
19.5mm
[0.77 in.]
[6.98 in.]
inlet
lubricant
49mm
[1.96 in.]
24mm
[0.94 in.]
177.5
Base
X
Meter
module
7