DROPSA nano Progressive Manuale d'uso e manutenzione - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso e manutenzione per Unità di controllo DROPSA nano Progressive. DROPSA nano Progressive 9. Divider

Stampa la pagina

4.3 END ELEMENT

The end element is used to terminate the dividers assembly. The tightening screws should be have the torque

specified when completing the assembly.

PART NUMBER

DESCRIPTION

0645749

END nP "nano Progressive"

You can order the components of dividers block separately. Remember that washers and assemblies screws must

be ordered separately also.

WASHERS

PART

N° elem.

NUMBER

0014396

0016047

0014181

5. CYCLE CONTROL DEVICES

You can control the lubrication cycle installing a device that can be electric (Hall Effect sensor) or just a mechanical

visual sensor (with colour strip) that indicates the internal movement of the spool during the lubrication cycle. It is

recommended to install them on both master and secondary dividers on the secondary master in order to have

rapid feedback of any blockages or failures in the lubrication system and for ease of troubleshooting.

A) The Ultrasensor can be directly assembled on any divider without special arrangements

"ULTRASENSOR"

1655308

PART NUMBER

ELECTRICAL CHARACTERISTICS

Max output power

Power supply

Contact

B) Visual monitoring pin with colour strip. This must be ordered with the divider element.

DIVIDER with colour strip visual indicator

Q. cm³

PAR NUMBER

0,025

0645778

0,045

0645779

0,075

0645780

0,105

0645781

PART

N° elem.

NUMBER

0014397

0014182

2A – NPN

0,7A – PNP

8 ÷ 28 VDC

NPN (NO)

PNP (NO)

DESCRIPTION

VISUAL INDICATOR nP 025 "nano Progressive"

VISUAL INDICATOR nP 045 "nano Progressive"

VISUAL INDICATOR nP 075 "nano Progressive"

VISUAL INDICATOR nP 105 "nano Progressive"

11Nm

SCREWS

PART

N° elem.

NUMBER

0014191

0014398

PART

N° elem.

NUMBER

0014399

0014400

14Nm

1655308

PART

NUMBER

0014401

0014402