anko PM-3400 Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Elettrodomestici da cucina anko PM-3400. anko PM-3400 10.

BEFORE USING FOR THE FIRST TIME

Carefully unpack the Theatre Popcorn Maker and remove all packaging materials.

2. Place the main unit on a clean, flat, working surface.

CAUTION: After preheating, the stainless steel kettle will be hot. Use caution when

adding oil and popcorn to the hot stainless steel kettle.

CAUTION: Always wait until all popping ceases before opening the front door.

3. Clean the floor and the inside of the main unit with a moist, non-abrasive sponge or cloth.

Wipe with a clean cloth and dry thoroughly.

4. Flip both of the kettle lids up and wipe the inside. Open the front door.

5. Attach the kettle to the motor. With the embossed CAUTION (replace with triangle

symbol) facing forward and the motor cord receptacle facing the back, tilt the kettle

towards you and slide both side arms of the kettle straight back into the brackets. It may

be necessary to grasp the bracket and fit it to the track on the side arm. When the side

arms are correctly seated into the brackets, flip the kettle up and the geared top of the

rotating rod will fit into the front. Inspect the top gear and then both brackets to ensure

the kettle side arms and rotating rod are properly locked into position.

CAUTION: Do not remove the kettle while it is in use.

Do not touch any hot surface until the kettle is fully cooled.

6. Attach the power cord into the kettle's motor receptacle located at the bottom rear of the

kettle unit.

7. Attach the crank, fit the threaded stem of the crankshaft through the hole in the side of

the main unit /

popcorn chamber. (See Figure 1.) Turn the crank counter-clockwise direction. Hold the

kettle with the

other hand and tighten until the crank is securely attached to the stainless steel kettle.

8. The Theatre Popcorn Maker is now ready for use.