3M Peltor WS ProTac XP MT15H7BWS5 Series Istruzioni per l'utente - Pagina 10
Sfoglia online o scarica il pdf Istruzioni per l'utente per Cuffie 3M Peltor WS ProTac XP MT15H7BWS5 Series. 3M Peltor WS ProTac XP MT15H7BWS5 Series 19.
Stampa la pagina
GB
3:10 Changing settings in the Configure menu
The headset has a Configure menu where you can adjust settings.
To access the menu, press and hold the (–) and (+) buttons (B:8) for 2 seconds (with the headset switched on).
Access to the Configure menu is confirmed by a voice saying: "menu". To change the settings, use the (–) and (+) buttons (B:8).
To move on through the Configure menu, press briefly on the On/Off/Mode button (B:7).
See quick guide for information on how the menu is set up and where the functions are located.
VOX
Voice-operated transmit
ON
OFF
Battery type
2xAA Alkaline, 1,5 V
Rechargeable (NiMH, 1,2 V)
Reset to Factory Default
Resets all functions to the factory settings.
Hold Bluetooth button to confirm (B:10)
3:11 Connecting external equipment via a cord (Flex -77 version)
External equipment can be connected via the Flex audio input (B:6)
For information on various cords, see Spare Parts/Accessories.
4. OTHER FUNCTIONS
• The last settings are stored when the headset is switched off.
• Low battery level is indicated by a voice message: "low battery".
• Digital noise reduction on the boom microphone
5. IMPORTANT USER INFORMATION
The headset must be fitted, adjusted and maintained in accordance with the instructions given in this manual.
The headset must be worn at all times in noisy surroundings and be inspected regularly for serviceability.
This ear-muff is provided with level-dependent attenuation.
The wearer should check correct operation before use. If distortion or failure is detected, please refer to the instructions for
replacement of the battery.
Warning! - Performance may deteriorate with battery usage.
Warning! - The output of the level-dependent circuit of this hearing protector may exceed the external sound level.
This ear-muff is provided with electrical audio input. The wearer should check correct operation before use. If distortion or
failure is detected, the wearer should refer to the manufacturers advice.
Warning! The output of the electrical audio circuit of this hearing protector may exceed the daily limit sound level.
This hearing protector provides an entertainment audio facility. The the entertainment audio signal is limited to 82 dB(A)
effective to the ear for a maximum input signal level over the Bluetooth protocol.
Warning! The audibility of warning signals may be impaired while using the entertainment facility.
NOTICE! 100% use of a proper hearing protector is the only certain protection from hearing loss.
In environments with more than 82 dB A-weighted noise level, you need to protect your hearing. The hearing receptors in
your inner-ears may be irreparably damaged if you lift a cup of your hearing protectors for even a very short time in a noisy
environment.
The use of a comfortable hearing protector, designed for the specific noise level in which it is used, is the best guarantee to
that you will wear the hearing protector 100% of the time to protect yourself from permanent hearing loss.
For best protection, brush aside excess hair around your ears so the cushions fit snugly on your head. The arms/bands of any
spectacles or goggles worn should be as thin as possible to allow the hearing protector to fit closely to the head.
4