anko 43056125 Manuale di avvio rapido - Pagina 9

Sfoglia online o scarica il pdf Manuale di avvio rapido per Altoparlanti anko 43056125. anko 43056125 10. Bluetooth party speaker

anko 43056125 Manuale di avvio rapido
9.Product information
Specifications
Amplifier
Output power
60W
≥500mV
Input Sensitivity
FM
FM range
87.5-108MHZ
Speaker
Treble Speaker
2 Inch
Bass Speaker
5.25 Inch
General information
AC Power
AC220-240V~ 50Hz
Battery
Rechargeable battery

USB play ability information

Compatible USB storage devices:
l USB flash memory (USB 2.0 or USB 1.1)
l USB flash players(USB 2.0 or USB 1.1)
l Memory cards (requires an additional card reader to work with this apparatus)
Supported for formats:
l USB or memory file format FAT32
l MP3 bitrate (data rate):32-320Kbps and variable bitrate
l Directory nesting up to a maximum of 8 levels
l Number of albums/folders:maximum 99
l Number of tracks/titles:maximum 999
l File name in Unicode UTF8 (maximum length:32 bytes)
Unsupported formats:
l Empty albums: an empty album is an album that does not contain MP3.
l Unsupported the file formats are skipped. For example, Word documents (.doc) or
MP3 files with extension .dlf are ignored and don't play.
15

10.Troubleshooting

Warning
Never remove the casing of this speaker.
If you encounter problems when using this speaker,check the following points before
requesting service.
No power
l Ensure that the AC power plug of the speaker is connected properly.
l Ensure that there is power at the AC outlet.
No sound or poor sound
l Adjust the volume.
l Disconnect the headphones.
l Check that the speakers are connected correctly.
l Check if the stripped speaker wires are clamped.
No response from the speaker
l Disconnect and reconnect the AC power plug, then turn on the speaker again.
Remote control does not work
l Before you press any function button, first select the correct source with the remote
control instead of the main unit.
l Reduce the distance between the remote control and the unit.
l Insert the battery with its polarities(+/- signs) aligned as indicated.
l Replace the battery.
l Aim the remote control directly at the sensor on the front of the speaker.
USB device not supported
l The USB device is incompatible with the unit. Try another one.
l The USB device is incompatible with the speaker or the USB damaged.
Poor radio reception
l Increase the distance between the speaker and your TV.
l Full extend the FM antenna.
l Put the speaker at a open area to search radio.
Bluetooth can not search or connect
l If other devices are connected to the machine, please disconnect other Bluetooth
devices and use the new device to search and connect again.
l Turn off the Bluetooth of your device , then turn on your device Bluetooth again,
search and connect. Or turn off the speaker and turn on again and switch to
Bluetooth mode.
16