Ankom A2000 Manuale di sostituzione - Pagina 2

Sfoglia online o scarica il pdf Manuale di sostituzione per Strumenti di misura Ankom A2000. Ankom A2000 2. Packing and agitator replacement
Anche per Ankom A2000: Procedura di assistenza (2 pagine), Procedura di assistenza (3 pagine), Procedura di assistenza (3 pagine)

ANKOM Technology 2052 O'Neil Rd Macedon, NY 14502 PH: (315) 986-8090 FAX: (315) 986-8091

Motor Assembly Replacement

A2000/A2000I

To replace the Motor in the Motor Assembly-

1. Loosen the two motor pulley set screws.

2. Loosen the four mounting bolts for the motor. Slide the

motor

forward and remove the drive belt and motor

pulley.

3. Remove the motor mount bolts. Replace the motor oriented

as below. Install the pulley and install the motor mount bolts-

leave them loose enough to slide the motor and to tension the

drive belt to a 1/8" (3mm) deflection. Tighten the mount

bolts.

4. Install the motor assembly, tighten the mounting nuts and

coupler set screw.

5. Re-connect the wiring.

6. Replace the back and bottom panel and the instrument will be

ready for use.

023

Service Procedure

(Page 1 of 2) 08/06/2014