BECKWITH ELECTRIC Syncrocloser M-3410A Manuale - Pagina 12
Sfoglia online o scarica il pdf Manuale per Relè BECKWITH ELECTRIC Syncrocloser M-3410A. BECKWITH ELECTRIC Syncrocloser M-3410A 18.
M‑5625 Digital Synchronizing System
Target/Status Indicators (LEDs)
• UPPER VOLTAGE LIMIT BUS OK
• UPPER VOLTAGE LIMIT GEN/LINE OK
• LOWER VOLTAGE LIMIT BUS OK
• LOWER VOLTAGE LIMIT GEN/LINE OK
r
•
V LIMIT OK
r
•
F LIMIT OK
• M-0193B READY
• SENDING RAISE SPEED
• SENDING LOWER SPEED
• SENDING RAISE VOLTAGE
• SENDING LOWER VOLTAGE
• BUS FREQUENCY HIGH
• GENERATOR FREQUENCY HIGH
• PHASE UV 27
• DIRECTIONAL POWER 32
• VOLT. UNBALANCE 47
• OVERCURRENT 51
• PHASE OVERVOLTAGE
• 60FL FUSE LOSS
• 81 O/U FREQUENCY
• OSC TRIGGER (indicates that the oscillograph has been triggered)
• DIAGNOSTIC (provides indication of the error code when flashing)
• RELAY OK (reveals proper cycling of the Sync Check relay microprocessor)
• OUTPUT 1 and OUTPUT 2 are used to indicate the status of the Sync Check output contacts.
The output LEDs will illuminate when the Sync Check output contacts are closed.
LED Test pushbutton resets the target LEDs of the Sync Check function if the conditions causing the operation
have been removed. Holding the Target/Output Reset button displays the present status of the Sync Check
function.
Communication
Communications ports include a front panel RS-232 port and a rear port user configurable to RS-232 or
RS-485. The RS-232 ports are connected physically with a DB-9 connector and the RS-485 port utilizes
4-wire interface mounting screw terminals.
M-3810A IPScom
®
For Windows
in RTU mode, implements serial, byte-oriented asynchronous communication with the M-3410A and provides
the following functions:
• Interrogation and modification of setpoints
• Time-stamped sequence of events information for the 32 most recent events
• Real-time metering of all quantities measured
• Downloading of recorded oscillographic data
• Sync Check Relay Setup
Communications Software utilizing the MODBUS communications protocol
TM
–12–