Becom 150-3078-1 Manuale d'uso - Pagina 9
Sfoglia online o scarica il pdf Manuale d'uso per Cavi e connettori Becom 150-3078-1. Becom 150-3078-1 15. Poe-splitter
Stampa la paginaUser Manual - PoE-Splitter
Last change: 25 March 2021/Version 3
3 Connecting the Device
The following figure shows the interfaces and status LEDs of the device.
Data & PoE IN
Connector description:
Connector
Description
Data & PoE IN
Connect this to your PoE switch or injector with a CAT5e or higher category patch cable.
Data OUT
Connect this to your camera with a CAT5e or higher category patch cable or connect it
with the RJ45 plug of your dedicated camera cable from BECOM systems.
24V DC OUT
Connect this header to the power supply cable of your camera. Refer to Figure 3-2 for
the pin description or connect it to the dedicated wires of your camera cable from
BECOM Systems using an appropriate mating part.
Mating part suggestion:
Figure 3-2: Pin description of the camera power supply connector (24V DC OUT)
© BECOM Systems 2021
PoE Class
Data OUT
Power
Status LEDs
Figure 3-1: Connectors and LEDs
691361100002 from Würth Electronics or similar part
Table 3-1: Connector Description
V-
V+
24V DC OUT
Current Limiter
9 | 15