Drucker Diagnostics 614VET Manuale dell'operatore - Pagina 12

Sfoglia online o scarica il pdf Manuale dell'operatore per Apparecchiature di laboratorio Drucker Diagnostics 614VET. Drucker Diagnostics 614VET 16.

6. Remove Accessories Before Moving: All tube holders, samples,

and caps must be removed from the rotor chamber before

transporting or storing the centrifuge to prevent damage and

injury.

LEANING AND

To prolong the life of the centrifuge cleaning and disinfection is

recommended every six months, or whenever there is a spillage or tube

breakage. Contaminants must be removed immediately, or corrosion and

premature degradation of components can occur.

1. Unplug the centrifuge before cleaning.

2. Apply cleaning solutions with a towel or cloth. Do not submerge

the centrifuge in water or other cleaning solutions as this will

cause damage and void the warranty.

3. ONLY isopropyl alcohol, soap and water, or a 10% (5500 PPM)

bleach solution should be used for cleaning and disinfection of

the centrifuge and accessories.

4. All surfaces must be dried immediately after cleaning and

disinfecting.

5. TBQ Germicidal products shall not be used, as they will cause

damage to the centrifuge and void the warranty.

6. The use of fully/partially halogenated hydrocarbons, ketones,

esters, ethers, benzyls, ethyl benzenes, and all other chemicals

not prescribed by the manufacturer shall not be used as they

may cause damage to the rotor chamber, rotor, tube holders,

accessories and centrifuge exterior and void the warranty.

7. It may be necessary to remove the rotor and clean the rotor

chamber. Follow the instructions on page 10 to remove and

reinstall the rotor.

Drucker Diagnostics +1-814-692-7661 - [email protected] Page | 12

ISINFECTION