Absolare Preamplifier Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Absolare Preamplifier. Absolare Preamplifier 9.

5. Connecting the Cables

AC power input is via a standard IEC inlet socket. Operating voltage must only be

changed by an authorized service agent.

You can connect 4 unbalanced (RCA) or 4 balanced (XLR) sources at the same

time. The selector knob on the left-hand side switches between the input channels.

Output is single-ended RCA or transformer balanced XLR depending on the version.

The Absolare Preamplifier will be ready to operate seconds after turning on the

power but attain full performance in 15 to 30 minutes.

Signal ground and chassis/power ground is separate inside the Signal Stage and

they are connected by a high pass filter to reduce hum and noise. The outside parts

of the RCA connectors are connected to signal ground. Balanced (XLR) version has

transformer balanced input and output on pins 2 and 3; pin 1 is connected to the

chassis ground.

There are no adjustments required for the preamp.

With the motorized remote control option, you can change the volume setting with

the IR remote control. Operating angle is approx 45°.

ABSOLARE Preamplifier User Manual 1.2