Anntlent AN-USF5-01 Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Estensore Anntlent AN-USF5-01. Anntlent AN-USF5-01 15. Cell phone signal booster

Figure 1

5. Equipment frequency band status and control:Click on each disc to enter the

frequency band operation interface, as shown in Figure 3.

（1）Equipment temperature indication: indicates the temperature at which the equipment

is operating.

（2）Equipment frequency band power: the power under this frequency band.

Device frequency band number: The frequency band number corresponding to this

interface.

（3）Frequency band gain control: The gain of this frequency band can be controlled, and

the user can set the gain of each frequency band to allow the device to operate at the

optimal power.

（4）Self excitation state of the frequency band: the self excitation state of the frequency

band. The green progress bar indicates the self excitation state. The longer the progress

bar is, the more normal it will be. The shorter the progress bar is, the more normal it will be

poor.

（5）Frequency band operating status: The operating status in this frequency band, with

green indicating normal operation and red indicating shutdown

（6）Click on each disc under the frequency band supported by the device to switch to

another frequency band and view the details of another frequency band.

Figure 3

6.In Figure 3, the terminal device scans around three base station sources and lists their

types and strengths. Click on the arrow corresponding to the direction of the base station

to enter Figure 4. The source is described in Figure 7, and the large disk indicates the

direction of the source. When installing an outdoor antenna, as long as the outdoor

antenna is aligned in this direction, the device can achieve optimal reception and

transmission effects.

Figure 2

Figure 4

10 / 14