Daikin R32 Split Series Manuale operativo - Pagina 8

Stampa la pagina

Daikin R32 Split Series Manuale operativo

5 Operation

The movable range of the flap varies according to the operation

mode. The flap will stop at the upper position when the airflow rate is

changed to low during the up and down swing setting.

Flap range in cooling or drying operation

Flap range in hating operation

Flap range in fan only operation

When. Adjust the airflow direction as desired.

What. The system directs the airflow differently, depending on the

user selection (swinging or fixed position). It does so by moving

horizontal blades (flaps) or vertical blades (louvers).

Setting

Moves up and down.

Vertical automatic

swing

Moves from side to side.

Horizontal

automatic swing

Moves alternately up and down and

3-D airflow

from side to side

direction

[—]

Stays in a fixed position.

CAUTION

ALWAYS use the wireless remote control or other user

interface (if applicable) to adjust the position of the flaps

and louvers. When the flaps and louvers are swinging and

you move them forcibly by hand, the mechanism will break.

The movable range of the flap varies according to the operation

mode. The flap will stop at the upper position when the airflow rate is

changed to low during the up and down swing setting.

To adjust the airflow direction

1 To use auto swing, press

Result:

will appear on the LCD.

Result: The flap (horizontal blade) will begin to swing.

2 To use fixed position, press

desired position.

Result:

disappears from the LCD.

To adjust the louvers (vertical blades)

1 Hold 1 or both knobs and move the louvers.

Knobs

Operation manual

Airflow direction

when the flap reaches the

INFORMATION

When the unit is installed in a corner of a room, the

direction of the louvers should be facing away from the

wall. Efficiency will drop if a wall blocks the air.

5.3.4

Comfort airflow operation

This operation can be used in heating or cooling operation mode. It

will provide a comfortable wind that will NOT come in direct contact

with people. The system automatically sets the fixed airflow position

upward in Cooling and downward in Heating operation mode.

Cooling operation mode

INFORMATION

Powerful and Comfort airflow operation CANNOT be used

at the same time. The last selected function takes priority.

If the vertical automatic swing is selected, Comfort airflow

operation will be cancelled.

To start/stop Comfort airflow operation

1 Press

to start.

Result: The flap position will change,

LCD, and the airflow rate is set to automatic.

Mode

Cooling/Drying

Heating

Note: Comfort airflow operation is NOT available in Fan only mode.

2 Press

to stop.

Result: The flap will return to the position from before the Comfort

airflow mode;

disappears from the LCD.

5.3.5

Powerful operation

This operation quickly maximizes the cooling/heating effect in any

operation mode. You can get the maximum capacity.

INFORMATION

Powerful operation CANNOT be used together with Econo

and Comfort airflow operation. The last selected function

takes priority.

Powerful operation will NOT increase the capacity of the

unit if it already operates at maximum capacity.

To start/stop Powerful operation

1 Press

to start.

Result:

is displayed on the LCD. Powerful operation runs

for 20 minutes; after that, operation returns to the previously set

mode.

2 Press

to stop.

Result:

disappears from the LCD.

Heating operation mode

is displayed on the

Position of flap...

Down

FTXP20~35M5V1B/B9

R32 Split series

3P520336-6T – 2021.12