Anolis ArcPower Micro 270 Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Alimentazione Anolis ArcPower Micro 270. Anolis ArcPower Micro 270 17.

Stampa la pagina

This device falls under protection class I.Therefore the ArcPower Micro 270 has to

be connected to a mains socket outlet with a protective earthing connection.

5.Installing instructions.

5.1.Mounting the ArcPower Micro 270

The ArcPower Micro 270 should be be placed on a non-f lammable f lat surface in any orientation and fixed by

the screws.There are 6 mounting holes of 5x7 mm in housing of the driver.

5.2.Conection cables

1.The adapter cable RJ45/XLR connects the ArcPower Micro 70 to the DMX controller.If your DMX controller

has RJ45 socket for DMX output,use RJ45 patch cable for connection with the ArcPower Micro 70.

RJ45 plug

View facing pins

Pin 1: Not used

Pin 2: Not used

Pin 3: Not used

Pin 4: Not used

Pin 5: +5V

Pin 6: Data +

Pin 7: Data -

Pin 8: GND

2.RJ45 patch cables category 5 that connect the ArcPower Micro 70 each other are wired 1:1,that is,pins with

the same numbers are connected together.

Pin 1: Not used

Pin 2: Not used

Pin 3: Not used

Pin 4: Not used

Pin 5: +5V

Pin 6: Data +

Pin 7: Data -

Pin 8: GND

5.3.Interconnecting the ArcPower Micro 270 and ArcLine Micro 36

The ArcPower Micro 70 is equipped two wiring blocks for easy connection of ArcLine Micro 36 modules.The

wiring blocks are wired in paralel.The power/data cable for connection of LED module is included and its wiring

is as follows:

ArcPower Micro 70

DMX 512 XLR plug (male)

Front view of the plug

Pin 1: GND

Pin 2: Data -

Pin 3: Data +

Pin 4: Not used

Pin 1: Not used

Pin 2: Not used

Pin 3: Not used

Pin 4: Not used

Pin 5: Not used

Pin 5: +5V

Pin 6: Data +

Pin 7: Data -

Pin 8: GND

ArcLine Micro 36