DRYDEN AQUA DA-GEN Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di illuminazione DRYDEN AQUA DA-GEN. DRYDEN AQUA DA-GEN 13.
Anche per DRYDEN AQUA DA-GEN: Manuale d'uso (9 pagine)

Stampa la pagina

1. Troubleshooting

110-230 V

DRY CONTACT

max. 3.15 A

1 2 3 4 5 6

7 8 9

10 11 12 13 14

Setup and connection of a Variable Speed

Pump, see section 11 - Variable Speed Pump

12.21

12.21 Automatic

In this mode the filtration is controlled by up to 3 timers.

We hardly recommend to run your system in a 24/7 mode with a variable speed pump.

For example: During the night time (6:00 until 24:00 & 0:00 until 10:00) in low speed, during day time (10:00 until 6:00) in medium speed.

To set the ON/OFF times select with the up/down keys in the timer line you want to change (1-3 ).

The plus/minus keys open the selected start time field. Set the time with plus/minus keys. Scroll with the up key to the minute field and set it up with

plus/minus keys. To confirm press OK and to cancel press return/escape.

Backwash: See chapter 13

12.31

12.31 Heating: This mode acts equally to the automatic mode, but besides it includes the option to work on a relay to control the temperature.

The system works with a hysteresis of 1 degree (example: the setting temperature is 23° C, the system will activate itself when the temperature

goes below 22° C and will not stop before it passes 23° C).

Use the plus/minus keys to set the desired temperatures

Clima OFF: The heating only works within the set filtration periods.

Clima ON: Keeps the filtration working when the filtration period is finished if the water temperature is below the setting temperature.

* Note: Mode only visible if the temperature probe is installed and/or heating is activated in the "Installer Menu".

13.1

13.1 Backwash Mode with Besgo Valve: The DA-GEN is configured for automatic backwash with Besgo. Use AUX 2!

• Mode:

• Start:

• Interval: Set backwash time in seconds (Recommendation: min. 240 seconds with AFM

• Freq.:

• Shortcut: Enable/Disable Shortcut for manual backwash

DRY CONTACT

110-230 V

max. 3.15 A

1 2 3 4 5 6

7 8 9

10 11 12 13 14

LIGHT

Lighting control

12. FILTRATION

12.1 Manual mode

A1 A2

FILTER PUMP

Filtration control

12.2 Automatic mode

12.3 Heating mode

13. AUTOMATIC BACKWASH

Choose Auto

Choose starting time

Choose frequency (at least weekly)

14. LIGHTING

14.1

14.4

Only with an external pump controller unit

12.11

12.12

12.11 Filtration:

Configuration control of the filter pump. To set, select

Filtration and confirm by pressing OK. The mode selection

is done in Mode line with the plus/minus keys.

12.12 Manual:

Manually turns ON/OFF the filtration process. No timing

or additional functions. The State (Status) line indicates

whether the filtration pump is ON.

Filter Cleaning: See chapter 13

, min. 300 seconds with Sand)

14.3

14.2

14.5

14.5 LED spotlight: In case of installallation of RGB LED lights in the

pool, you can change the color of the lights in the pool. Select the length

of time in seconds in Pulse length and then press Next Program option

to apply the pulse. Refer to your LED spotlight manual to set its different

colors.

Without an external pump controller unit

14.1 Lighting

14.2 Manual Mode (ON/OFF). You can activate

the light also by pressing the short cut. You can

set a timer, after that the light will go out.

14.3 Automatic Mode: Switches lights according

to timer settings. Additional you can switch the

lights on by pressing the Shortcut button