DS Pocket Checker-Pro Istruzioni

Sfoglia online o scarica il pdf Istruzioni per Strumenti di misura DS Pocket Checker-Pro. DS Pocket Checker-Pro 4.
Anche per DS Pocket Checker-Pro: Istruzioni (4 pagine)

Stampa la pagina

RPM reading :

Connect the R.P.M. reading probe to the 3,5mm stereo jack connector. You'll nd it situated on the side of

the " DS-Pocket Checker ".

Press the "Go!" button several times till the menu Wheel RpmMax is displayed.

One minute past without pressing more the "Go!" button, the LCD screen visualizes:

R=0 Max=000 waiting to start the revolutions reading.

R= shows the real revolutions value and Max= shows the maximum measured value.

Place the reading probe in a few mm from the unit you want to check the R.P.M. Rpm will be displayed on

the LCD screen.

In order to realise the R.P.M. measurement correctly you'll need a su cient di erence of the

colours. We recommend realising this test on the black surface (tyres, crowns, for example) and a white

label stuck or mark painted on the area to read (a correction uid as Tipp-Ex is a good solution). This white

should cover one quarter of the diameter area you want to read (photos 2 and 3).

Developed and designed by:

IBB Auto Racing S. L.

c/ La Masia, 26 08711 ODENA ( IGUALADA )

Barcelona - SPAIN www.ds-racingproducts.com

+34 938 030 880 Fax +34 938 055 057

Internacional Sales:

P.O. Box 790 St. Heiler JE4 OSW

Jersey (Great Britain) www.mrrc.com

INSTRUCTIONS

ENG

TECHNICAL DATA:

· This device contains a LCD screen (20 digits).

· Checks and veri es the motor or axle R.P.M.

(revolutions per minute) and records the

maximum value.

· Reads up to 50.000 R.P.M.

· Checks and veri es the magnetic eld

(expressed in GAUSS) in three di erent options:

- Maximum value.

- Actual value.

- Maximum value measured during 2,1 seconds.

· This new version integrates a new and more

sensible liner symmetric sensor for the

magnetic eld which allows the neodymium

magnet measuring.

· Dimensions: length: 10 cm; weight: 5 cm;

height: 2,5 cm

· The unit needs a 9 Volt battery (not included).

Switch

ON/OFF

Display LCD

Gauss

Sensor

Connector for

R.P.M. sensor

PARTS OF THE DEVICE:

• Switch: ON/OFF

Switches on or o the device.

• "Go!" button or Function Selector

To choose and execute the functions of di erent

measurements.

• Gauss sensor:

To be placed next to the motor or magnet in order

to test the magnetic camp expressed in Gauss.

• Connector for R.P.M. sensor:

To connect the 3,5mm stereo jack with the probe that

reads the R.P.M.

• LCD screen

Displays data obtained.

• Internal connector for the 9 Volt battery

(not included)

Connector for

R.P.M. sensor

R.P.M.

Sensor

Internal 9v

battery.

R.P.M.

Prove