Anpat Electric LINEAR II Manuale di istruzioni per l'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Caricabatterie Anpat Electric LINEAR II. Anpat Electric LINEAR II 3.

(Continued from page 1)

! CAUTION –PRECAUTIONS:

a) Contact with electrolytic acid can cause skin irritation and damage clothing.

Wear a protective apron, gloves and goggles when working with batteries.

Have plenty of fresh water and soap nearby in case battery acid contacts your

skin, clothing, or eyes.

b) Remove personal metal items such as bracelets, rings, necklaces, and watches

when working with batteries. A battery can produce a short circuit current sufficient

enough to weld metal objects, causing severe burns.

c) Never smoke or allow a spark or flame in the vicinity of the batteries. Caution must

be taken to reduce the risk of dropping metal tools onto the battery. A spark or short

circuit may result in an explosion

FIRST AID:

Immediately flush eyes with cold, fresh water for a minimum of 10 minutes if

electrolytic acid comes in contact with eyes. Seek professional medical attention.

VENTILATION:

Blocking louvers or air flow perforations of convection or fan cooled

battery chargers will result in damage to the unit. When installing the unit leave space for

air to flow freely through the intake and discharge louvers and/or perforations

GROUNDING AND AC POWER CONNECTION INSTRUCTIONS:

The charger is equipped with an electrical cord with a equipment grounding conductor

and grounding plug. The plug must be attached into an outlet that is properly installed

and grounded in accordance with all local codes and ordinances.

! DANGER:

Never alter AC cord or plug provided. If it will not fit the outlet, have

proper outlet installed by a qualified electrician. Improper connection can result in

electric shock

INSTALLATION:

1) To provide maximum reliability, charger must be installed in a well-ventilated

area, so that free airflow is not restricted through the side intake and exhaust

vents.

2) Check polarity of battery posts. Positive (POS, P, +) and Negative (NEG, N, -).

Attach positive (red) charger lead to the positive battery post. Attach negative

(black) charger lead to the negative battery post.

! WARNING:

Do not disconnect DC charger leads during charging. Damage to the

charger could result and void the warranty.

! WARNING:

Do not connect DC charger leads if the charger is connected to AC

power. DC charger leads must be connected first.

www.chargersdirect.com / Email: [email protected] / Fax: 310.638.5024

Call Toll Free 800.775.5310