DS Produkte 804026-M Istruzioni per l'uso - Pagina 2

Sfoglia online o scarica il pdf Istruzioni per l'uso per Luce per esterni DS Produkte 804026-M. DS Produkte 804026-M 4.

Stampa la pagina

Operating instructions

Product number Z 05743

Dear customer,

Before using the product for the ﬁ rst time, please carefully read

through these instructions and store them in a safe place. If you

have any questions, please contact customer service via our

www.service-shopping.de

website:

Important notes

❐ The product is intended to decorate and light garden paths,

garden beds, lawns and driveways.

❐ The product is designed for private use and is not intended for

commercial use. Only use the product as instructed. Any other

use is deemed improper. Store the instructions in a safe place.

❐ Defects arising due to improper handling, damage or at-

tempts at repair are excluded from the warranty. This also

applies to normal wear and tear.

❐ Attention! Danger of suffocation! Keep the packaging materi-

al away from children and pets.

❐ Children must be under supervision to ensure that they do not

play with the product. They could injure themselves with the

tip of the ground spike, among other things.

❐ Do not disassemble the product (except for removing the

storage battery prior to disposal of the solar light). Only have

the product repaired by a qualiﬁ ed workshop or by customer

service.

❐ If a storage battery has leaked, ensure that the battery acid

does not come into contact with your skin, eyes, and mucous

membranes. In case of contact with battery acid, rinse the af-

fected areas immediately with plenty of clean water and seek

immediate medical attention.

❐ Storage batteries may not be disassembled, disposed of in

ﬁ re, immersed in liquids or short circuited.

❐ Do not allow the product to fall and do not subject it to severe

percussions. The glass is breakable.

❐ Do not use the product if it exhibits damages.

❐ Never submerge the product in water or other liquids! It is

only splash-proof.

❐ In the event of extreme weather conditions (e.g. storm, hail)

or if you do not intend to use the product for a prolonged

period of time, turn it off and store the product in a dry place.

❐ Ensure that the solar ﬁ eld is always clean in order to ensure

the greatest possible collection of light. Therefore, clean the

light occasionally with a damp cloth. Do not use corrosive

or abrasive cleaning products to clean the product! They

could damage the surface.

Technical data

Product number:

Z 05743

Model number:

804026-M

Lamp shade diameter:

25 cm

Rechargeable battery:

1.2 V DC, Ni-MH, 600 mAh, type AA

Product contents

1 solar light, 1 shaft (2-parts), 2 connecting pieces, 1 ground

spike

Installation site

Set the product up in a place where it is exposed to direct

sunlight the entire day if possible (at least 6 hours – ideally, in

open areas, not underneath trees etc.). However, do not place

the light near artiﬁ cial light sources (e. g. street lamps) as the

sensor may react to the artiﬁ cial light and this may affect the

luminance.

Start-up

1. Unpack the product contents and

Lamp shade

Socket

Upper part

of the shaft

2. Put the upper and lower part of the

Lower part

of the shaft

3. Push the ground spike into the

Ground spike

4. Push

Similar to the shown

5. Hold the solar light ﬁ rmly by the socket and remove the lamp

shade by twisting it.

On / Off

switch

Solar panel

LED

The battery will be charged in the daytime via the solar panel. To

charge fully, the battery needs at least 6 hours of direct sunlight.

If the On / Off switch is in the ON position, the solar light will au-

tomatically switch on when darkness falls, and off again when it

becomes light.

If you plan not to use the solar light for a substantial time, or wish

to switch it off manually, move the On / Off switch to the OFF

position.

Disposal

The packaging material can be recycled. Dispose of the

packaging in an environmentally-friendly manner and

make it available for the recyclable material collection-ser-

vice.

Dispose of the product in an environmentally-friendly man-

ner. The product does not belong in the household gar-

bage. Dispose of it at a recycling centre for old electrical

and electronic appliances. For more information, please

contact the administration in your community.

Batteries and storage batteries must be removed and dis-

posed of separately before disposing of the product. To

protect the environment, batteries and storage batteries

may not be disposed of together with normal household

waste. Instead they must be turned in at collection points.

Be sure to observe applicable legal regulations on battery

disposal.

Removing the storage battery

1. Remove the lamp shade.

2. Remove the cross-head screws.

3. Remove the solar panel. You will ﬁ nd the battery on the back

of the solar panel.

4. Now remove the battery and dispose of it in an environmen-

tally-friendly manner.

Customer service / importer:

DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany

Tel.: +49 (0) 38851 314650 *)

*) Calls subject to a charge.

As part of ongoing development, we reserve the right to alter products,

packaging or enclosed documentation at any time.

remove all protective wrappers

and stickers, if present. Check

all parts for possible transport

damages. Should you identify

any transport damages, please

promptly consult customer ser-

vice.

shaft together using the connect-

ing piece.

shaft.

the

second

connecting

piece into the shaft and into the

socket of the lamp shade.

6. Move the On / Off switch to

the ON position.

7. Screw the lamp shade

back into the socket.

8. Push the ground spike into

the ground. The shaft must

be vertical and securely

anchored in the soil.

Z 05743_V5