FOVNO RS-H1B Manuale - Pagina 6
Sfoglia online o scarica il pdf Manuale per Accessori per biciclette FOVNO RS-H1B. FOVNO RS-H1B 12. Inverted sucker bike rack
Stampa la paginaInstructions
The saddle suction foot installation
Select the mounting
holes according to the
actual situation
Suction foot adsorption and removal:
1. Before installation, clean the installation position and suction foot to avoid dust affecting the sealing, or water accumulation causing the suction foot to be slippery.
2. Press the suction foot vertically against the roof with one hand, and push the cylinder rod with the other hand to draw out the air, as shown in Figure Ⅱ, until the white line
enters the pump. Make sure that the cylinder rod has no obvious return.
3. After use, remove it from the edge of the suction foot by hand as shown in Figure Ⅲ,make the air into the suction foot,then take it out.
Press vertically
Press the cylinder rod
Figure Ⅱ
Binding behind the seatpost
Peel along the edge of the suction foot
Figure Ⅲ
15