DS Produkte SAV-09 Manuale di istruzioni - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per Prodotti per la cura della persona DS Produkte SAV-09. DS Produkte SAV-09 8.

Stampa la pagina

Removing Hair

ATTENTION!

❐ Before you use the Article on your facial area or other sensitive

areas, test tolerance on a small area of your skin and wait 24

hours. If no skin irritation occurs, you may continue using the

device as described in these instructions. Carefully read through

these instructions before you use the article in order to prevent

unnecessary skin irritation.

❐ Do not apply excessive pressure! Excessive rubbing or pressure

may caus skin irritation!

• You will achieve best results if your hair is not longer than

5 mm.

•

After a treatment, your skin may have a slightly gray appear-

ance. This is due to the peeling effect of the pads that remove

dead skin cells from your skin. This will vanish once you apply

a lotion or cream.

•

Sensitive skin may redden slightly when removing hair, this is

normal. Cool the applicable areas with cold water. This will

reduce reddening and skin irritation. In the event of severe,

prolonged skin irritation, please consult a physician!

Removing facial hair

1. Use the small applicator with a small hair removal pad.

2. Gently pull your skin so that it is smooth and taut.

3. Move the applicator over the skin in circles while applying mild

pressure, three times clockwise and three times counter clock-

wise until all hair has been removed.

4. After completing the hair removal process, apply a lotion or

cream to prevent skin irritation.

Removing Body Hair

1. Use the large applicator with a large hair removel pad.

2. Push the On/Off switch on the vibration

adapter to start the vibration function. The

gentle vibration will stimulate your hair folli-

cles. This improves hair removal and you will

achieve smoother results.

3. Gently pull your skin so that it is smooth and

taut.

4. Move the applicator over the skin in cir-

cles while applying mild pressure, three

times clockwise and three times counter

clockwise until all hair has been removed.

5. Once you have completed hair removal, push the On/Off switch

of the vibration adapter in order to turn off the device.

6. Use the small applicator to remove hair on hard to reach areas

such as your knees, ankles or individual hairs.

7. After completing the hair removal process, apply a lotion or

cream to prevent skin irritation.

Cleaning

ATTENTION!

❐ Take the vibration adapter off of the large applicator before you

clean it!

❐ The vibration adapter may not be immersed in water nor may it

come into contact with water.

❐ Never remove residue on the applicator using oils as this will

prevent the sticky ﬁ lm on the hair removal pads from sticking!

Remove adhesive residue on the applicator by using rubbing alcohol

or warm water and mild detergent.

05978_DE-GB-FR-NL_A4_V2.indd 4

Technical Data

Model number:

SAV-09

Article number:

Z 05978

Voltage supply:

1.5 V button cell, type AG 12

Disposal

The packaging material is recyclable. Dispose of the pack-

aging in an environmentally-friendly manner and make it

available for the recyclable material collection-service.

Dispose of the article in an environmentally-friendly man-

ner.

Dispose of the article in an environmentally friendly man-

ner if you do not wish to use it any more. It should not be

disposed of alongside general household waste. Dispose of

it at a recycling centre for used electrical and electronic

devices. You can obtain more information from your local

authorities.

Non-rechargeable and rechargeable batteries should be re-

moved prior to disposal of the device and disposed of sepa-

rately from the device. To protect the environment, non-re-

chargeable and rechargeable batteries may not be disposed

of with the normal household waste, but must be taken to

suitable collection points. Also note the relevant statutory

regulations governing the disposal of batteries.

Customer service / importer:

DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany

Tel.: +49 (0)38851 314650 *)

*) Calls subject to a charge.

19.12.12 10:47