Daily Youth GT5Ds Manuale - Pagina 7

Sfoglia online o scarica il pdf Manuale per Tapis roulant Daily Youth GT5Ds. Daily Youth GT5Ds 19. Dc commercial motorized treadmill

Stampa la pagina

V. Assembly step

All parts of electric treadmill have been strictly assembled and debugged before the ex works. An electric

treadmill can be easily assembled into if the installation is carried out by observing following steps.

Step I: Install upright pole: Open the packing box (box

B) and then bring out the treadmill. Firstly, lock the left

upright pole on the treadmill frame in 2 M10×20 and 2

M10×30

round

head

(containing shim); secondly, connect the right upright

pole (control line is provided in the upright pole) with

the control line reserved on the control line; then,

insert the connector of the control line into the

wire-through hole of the right upright pole; finally, lock

the right upright pole on the treadmill frame in 2

M10×20 and 2 M10×30 round head hexagon socket

screw (containing shim), as shown in the figure below:

Step III: Install screen: Open the packing box and

then take out the screen. Firstly, connect the wire of

the screen with that of the meter head in one-to-one

way; secondly, insert the screen into the meter head;

finally, lock the screen on the meter head in 4 M6×25

hexagon socket head cap bolts (containing shim), as

shown in the figure below:

hexagon

socket

screw

Step II: Install meter head: Open the packing box (box

A) and then bring out the meter head. Firstly, connect

the control line in the right upright pole with that at the

lower right of the meter head; secondly, insert the

meter head into the left and right upright poles; finally,

lock the meter head on the left and right upright poles

in 6 M8×16 hexagon socket pan head screw

(containing shim), as shown in the figure below:

Step IV: Install the decorative elements of upright pole

and lower meter: Firstly, fix the decorative elements of

left and right upright poles at the treadmill in 6 M8×8

large crossed flat head screw; secondly, fix the

decorative elements at lower left and right of the

meter on the left and right upright poles below the

meter head in 2 M4×8 large crossed flat head screw

and 4 M4×10 round head tail-cut tapping screw, as

shown in the figure below:

-6-

M4×10 round head

tail-cut tapping

screw

M4×8 large

crossed flat

head screw