Foxconn VT8237R Plus Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Immagazzinamento Foxconn VT8237R Plus. Foxconn VT8237R Plus 16. Sata raid

RAID 1 (Mirroring)

RAID 1 writes duplicate data onto a pair of drives and reads both sets of data in

parallel. If one of the mirrored drives suffers a mechanical failure or does not

respond, the remaining drive will continue to function. Due to redundancy, the

drive capacity of the array is the capacity of the smallest drive. Under a RAID 1

setup, an extra drive called the .spare drive. can be attached. Such a drive will be

activated to replace a failed drive that is part of a mirrored array. Due to the fault

tolerance, if any RAID 1 drive fails, data access will not be affected as long as

there are other working drives in the array.

JBOD (Spanning)

A spanning disk array is equal to the sum of the all drives when the drives used

are having different capacities. Spanning stores data onto a drive until it is full,

then proceeds to store files onto the next drive in the array. W hen any disk

member fails, the failure affects the entire array. JBOD is not really a RAID and

does not support fault tolerance.

2. Installing SATA Hard Disks

STEP 1: Install the SATA hard disks into the drive bays.

STEP 2: Connect one end of the SATA data cable to the motherboard's primary

SATA connector (SATA_1).

STEP 3: Connect the other end of the SATA data cable to the master SATA hard

disk.

STEP 4: Connect one end of the second SATA data cable to the motherboard's

secondary SATA connector (SATA_2).

STEP 5: Connect the other end of SATA data cable to the secondary SATA hard

disk.