DAITEM SH274AX Manuale di installazione - Pagina 10

Sfoglia online o scarica il pdf Manuale di installazione per Sensori di sicurezza DAITEM SH274AX. DAITEM SH274AX 13. Contact detector
Anche per DAITEM SH274AX: Manuale di installazione (4 pagine)

Stampa la pagina

6.2 Changing the battery

To change the battery:

1. switch the control panel to installation mode and ask the master user to press:

master code

2. open the detector casing (see § on Opening),

3. unclip the lithium battery pack,

4. wait 2 min. before replacing the ﬂat lithium battery,

5. close the detector,

6. switch the control panel back to user mode, press:

engineer installer code

• The lithium battery pack must be replaced by the same type of pack with the same technical characteristics,

i.e. (3 V).

• We advise you to use the DAITEM BatLi31 pack available in the catalogue in order to guarantee

individual safety and equipment reliability.

• Dispose of the waste lithium power pack in an appropriate recycling bin.

Waste processing of electrical and electronic devices at the end of their service life (Applicable in European

Union countries and other European countries with a waste collection system). Used on products or product

packaging, this symbol indicates that the product must not be thrown out with household waste. It must be taken

to a waste collection point for electrical and electronic product recycling. When you make sure that this product

is disposed of in the most appropriate manner, you are helping to protect the environment and human health. If you

would like additional information concerning the recycling of this product, please contact your town/city council, nea-

rest waste collection centre or the shop where you bought the product.

then press:

engineer installer code

IMPORTANT: the detector's

configuration is saved when the

battery is changed.