ansio Aeropura Midi Istruzioni e manuale operativo - Pagina 9
Sfoglia online o scarica il pdf Istruzioni e manuale operativo per Deumidificatore ansio Aeropura Midi. ansio Aeropura Midi 13. 12l dehumidifier
Air inlet temperature is
L3
too high
Air inlet temperature is
L4
too low
REMOVING AND EMPTYING THE TANK
Press the power button to turn the appliance OFF before removing the water tank.
Hold the water tank at the back of the unit using the slots on either side of the unit and gently tug it out.
•
Empty the water from the tank completely.
•
Install the water tank back on to the unit.
•
After installing the water tank properly and turning the power on, the unit will go on to the previously used mode
•
automatically.
CONTINUOUS DRAINING
If you require the dehumidifying function to continue without having to empty the water tank regularly, you can connect a hose
(hose included) to the unit to drain continuously.
Note: The hose should have an inner diameter of 14 mm.
1. Remove the water tank. Refer to "Removing and emptying the tank" section.
2. Insert the hose provided into the drainage outlet.
3. Place the water tank back into the unit. Make sure that the hose is going downhill and is not blocked or kinked.
4. Ensure that the other end of hose has a proper drainage outlet such as a drain or a bucket.
GENERAL CLEANING
Unplug the unit from the wall socket and remove the water tank. Use a soft-cloth to clean away any dust/debris on the unit
making sure to clean the air inlets.
CLEANING AND REINSTALLING THE FILTER
When the unit is used regularly, the filter may become clogged with dust particles. Follow the steps below to clean the filter:
ANSIO 1539 (J21v01)
Slowly flash L3
42
C
o
≤
Slowly flash L4
0
o
C
≤
Customer Support - UK Toll Free 0800 080 6781; +44 207 157 9795
Compressor stop working, fan works at low
fan speed. 10mins later, if the temperature
decreases to below 40
normally.
Compressor stop working, fan works at low
fan speed. 10mins later, if the temperature
increases to above 2
normally.
C, machine will work
o
C, machine will work
o
9