Anslut 006517 Manuale di istruzioni per l'uso - Pagina 8
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Apparecchiature di illuminazione Anslut 006517. Anslut 006517 8. Lamp post
Stampa la pagina
EN
SAFETY INSTRUCTIONS
•
For outdoor use.
•
Disconnect the power supply before
installation.
•
Check that the rated voltage corresponds
to the mains supply voltage.
•
Do not connect the light to the mains
while it is still in the pack.
•
Check that all electrical cables comply
with the applicable regulations and that
they are connected in accordance with the
instructions. Never attempt to replace
damaged electrical cables yourself.
•
Pay attention so that no concealed wires
are damaged in connection with
installation.
•
Be careful not to damage the insulation on
the wires during installation. Make sure that
the wires do not come into contact with sharp
edges. Damaged insulation can result in a
risk of electric shock.
•
Do not insert or remove the light source
when the light is connected to the mains.
•
Check that the bulb holder has a light
source.
•
Do not use the light without the glass. If
the glass is damaged, disconnect from the
mains before replacing the glass.
WARNING!
New installations and extensions to existing
systems should always be carried out by
an authorised electrician. If you have the
necessary experience and knowledge
(otherwise contact an electrician), you can
replace power switches and wall sockets, fit
plugs, extension cords and light sockets.
Incorrect installation can result in fatal injury
and the risk of fire.
8
SYMBOLS
Approved as per applicable
directives.
Recycle discarded product as
electrical waste.
TECHNICAL DATA
Rated voltage
Output
Socket
Protection rating
For light sources with energy class
INSTALLATION
See illustrations for installation instructions:
FIG. 1–17
WARNING!
Disconnect the power supply before installation.
230 V ~ 50 Hz
Max 100 W
E27
IP44
A++ to D