DSC AMB-300 Istruzioni per l'installazione - Pagina 2

Sfoglia online o scarica il pdf Istruzioni per l'installazione per Sensori di sicurezza DSC AMB-300. DSC AMB-300 4. Addressable pir detector

Beam Patterns for Lenses BV-L1 to BV-L4

Locating the Detector

Select a detector location that will provide the coverage required keeping in mind the

following potential problems.

• Do not aim the detector at reflective surfaces such as mirrors or windows as this

may distort the coverage pattern or reflect sunlight directly onto the detector.

• Avoid locations that are subject to direct high air flow such as near an air duct out-

let.

• Do not locate the detector near sources of moisture (steam or oil).

• Do not aim the detector such that it will receive direct or reflected (mirror) sunlight.

• Do not limit the coverage by large obstructions within the detection area such as

plants or filing cabinets.

• When using BV-L4 (Pet Alley lens): Do not aim the detector at a stairway which a pet

has access to. Do not place furniture or objects higher than 3 ft/0.9 m, which a pet

can climb onto (e.g. a cat on a couch), closer than 6 ft/1.8 m to the detector.

Device Wiring

To connect the AMB-300, consult the wiring diagram below: