Foxfury Lighting Solutions Nomad P56 Manuale di avvio rapido - Pagina 4

Sfoglia online o scarica il pdf Manuale di avvio rapido per Apparecchiature di illuminazione Foxfury Lighting Solutions Nomad P56. Foxfury Lighting Solutions Nomad P56 6.
Anche per Foxfury Lighting Solutions Nomad P56: Manuale del prodotto (20 pagine)

Stampa la pagina

INSTALLING THE BATTERY TUBES | 30 MINS ESTIMATED

Installing the Nomad

them, but in reverse order.

WARNINGS

Be sure to check polarity , positive ( + ) and negative ( – ), when installing the

Battery Tubes.

Replace ALL Batteries with new ones at the same time.

Start with the bottom of Battery Tube. Attach the black Cap to the

NEGATIVE end of the Battery Tube. While holding the Cap in place,

reinsert it into the Battery Compartment, at an angle/

While still applying downward pressure to the Battery Tube, attach the red

Cap to the opposite (POSITIVE) end of the Battery Tube. Once secure,

push down again and slide the Battery Tube back into place in the Battery

Compartment.

IMPORTANT: Be sure to place the red and black wires directly behind

the Battery Tube before re-installing it into the Battery Compartment.

This will prevent the wires from being damaged, and it will help the

Battery Tube go back into place easier.

Once the Battery Tubes are installed, test the Nomad

turns ON. If it does not, check the Battery Tubes for any connection

errors with the positive ( + ) and negative ( – ) ends. Then, place the Battery

Cover back over the Battery Tubes and tighten the four (4) screws into

place.

Battery Tubes follows the same procedures as removing

RED CAP

(POSITIVE + )

BATTERY TUBE PLACEMENT WHILE INSTALLED

(HORIZONTAL VIEW)

BLACK CAP

(NEGATIVE – )

to make sure it