DSC LCD 5500 Manuale - Pagina 16

Sfoglia online o scarica il pdf Manuale per Pannello di controllo DSC LCD 5500. DSC LCD 5500 17. Security station for power 832 security system
Anche per DSC LCD 5500: Manuale di istruzioni (20 pagine)

Stampa la pagina

Make sure your fire warning system is operational by conducting weekly tests as noted

elsewhere in this manual. If you are unsure about system operation, contact your installing

dealer.

It is recommended that you contact your local fire department and request further information on

home fire safety and escape planning. If available, have your local fire prevention officer

conduct an in-house fire safety inspection.

Maintenance

With normal use, the system requires minimum maintenance. The following points should be

observed.

1. Do not wash the security station with a wet cloth. Light dusting with a barely damp cloth should

remove normal accumulations of dust.

2. The battery/bell test is designed to determine battery condition, however it is recommended that

the stand-by batteries be replaced every three years.

3. For other system devices such as smoke detectors, passive infrared, ultrasonic or microwave

motion detectors or glassbreak detectors, consult the respective manufacturer's literature for

testing and maintenance.

Limited Warranty

Digital Security Controls Ltd. warrants that for a period of twelve months from the date of purchase,

the product shall be free of defects in materials and workmanship under normal use and that in

fulfilment of any breach of such warranty, Digital Security Controls Ltd. shall, at its option, repair or

replace the defective equipment upon return of the equipment to its factory. This warranty applies

only to defects in parts and workmanship and not to damage incurred in shipping or handling, or

damage due to causes beyond the control of Digital Security Controls Ltd. Such as lightning,

excessive voltage, mechanical shock, water damage, or damage arising out of abuse, alteration or

improper application of the equipment.

The foregoing warranty shall apply only to the original buyer, and is and shall be in lieu of any and all

other warranties, whether expressed or implied and of all other obligations or liabilities on the part of

Digital Security Controls Ltd. This warranty contains the entire warranty. Digital Security Controls Ltd.

neither assumes, nor authorizes any other person purporting to act on its behalf to modify or to

change this warranty, nor to assume for it any other warranty or liability concerning this product.

In no event shall Digital Security Controls Ltd. be liable for any direct or indirect or consequential

damages, loss of anticipated profits, loss of time or any other losses incurred by the buyer in

connection with the purchase, installation or operation or failure of this product.

Warning

Digital Security Controls Ltd. recommends that the entire system be completely tested on a regular

basis. However, despite frequent testing, and due to, but not limited to, criminal tampering or

electrical disruption, it is possible for this product to fail to perform as expected.