Anslut 427632 Manuale di istruzioni per l'uso - Pagina 17

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Luce a diluvio Anslut 427632. Anslut 427632 18.

Connect the power cords (Fig. 2B) and replace the clamp.

Replace the junction box cover. Take care not to lose the cover's rubber gasket.

Mount the floodlight onto the wall bracket, using the two screws again. Adjust the floodlight

to the desired position and tighten the two screws.

OFF

MOVEMENT SENSOR

–

Detection area of movement sensor (PIR) (Fig. 3)

–

Set the scanning range of the PIR sensor by adjusting the swivel joint as shown in Fig 4.

–

Select a duration time (from 10 ± 5 seconds to 5 ± 1 minutes) and Lux level (from

daylight to evening time) by adjusting the TIME and LUX knobs (Fig. 4).

–

Daylight mode shows that the PIR sensor is active round the clock, while night mode

means that the PIR sensor is only active during the hours of darkness.

–

Detection distance: max 12 metres, detection angle: 180°

N Blue (neutral)

Yellow/green (earth)

Brown (line conductor)

8 mm

1. 230 V, 3 x 1.0 mm²

2. Screw

3. Plastic plug

4. Bracket

1. 5-10 mm

2. Brown cable

3. Yellow/green cable

4. Blue cable

5. Bracket

6. Screw

7. Lamp