Foxfury Lighting Solutions RUGO Manuale di avvio rapido

Sfoglia online o scarica il pdf Manuale di avvio rapido per Luce di lavoro Foxfury Lighting Solutions RUGO. Foxfury Lighting Solutions RUGO 2. Can be mounted to an action cam, dslr camera, most tripods or to the puck adaptor (purchased separately)

Stampa la pagina

RUGO

™

QUICK START GUIDE

WARNINGS

When used for extended periods of time the

Rugo

will become HOT to the touch.

™

Do not stare into the LEDs for long periods of

time or from a close range (less than 2ft).

This product is designed as an auxiliary lighting

tool to be used with photo, video, and film.

DO NOT use the Rugo

as a primary light source

™

for activities.

While using any FoxFury product, please operate

at safe speeds.

Be sure to rinse the Rugo

with fresh water

™

immediately after use in the ocean or a pool.

It is the responsibility of drone/UAV users to

follow the FAA laws and regulations and/or the

laws and regulations applicable to flight location.

IMPORTANT!

Please fully charge the Quick Swap

Power Pack

™

before using the Rugo

for the first time.

™

MOUNTS INCLUDED

STANDARD MOUNT

¼"–20 AND

WITH (2) KNOBS

COLD-SHOE MOUNT

THUMBSCREWS (2)

FULL ASSEMBL Y

¼"-20 MOUNT

POWER/MODE

SWITCH

TRI-LENS

CHARGE

INDICATOR

THUMBSCREWS

DISASSEMBLED LIGHT HEAD

LED CONTACT

CAVITY (2)

LED MODULE

SCREW HOLE (4)

O-RING

ACCESS SCREW

DISASSEMBLED POWER PACK

LOCKING POST

USB CHARGE PORT

POWER CONTACTS

CHARGING THE POWER PACK

™

Press and hold the Power Pack Release

Lever located on the Light Head portion of

the Rugo

™

(Rugo

in steps 1–3 shown with no mounts and is flipped to

™

show Power Pack Release Lever)

While maintaining pressure on the Power

Pack Release Lever, pull the Light Head

and Power Pack apart. If unable to pull

apart easily , try moving the Power Pack

back and forth while continuing to pull.

Insert the provided Micro USB Cable into

the Power Pack. Then, insert the opposite

end USB (Type A) into a USB compatible

power source or into the included AC/DC

Adaptor.

OPERATIONAL MODES

DIM mode: Press the Power/Mode

Switch once.

LOW mode: From DIM mode, press

the Power/Mode Switch once.

MEDIUM mode: From LOW mode,

press the Power/Mode Switch once.

HIGH mode: From MEDIUM mode,

press and hold the Power/Mode

Switch once.

OFF: From ANY mode, press and

hold the Power/Mode Switch for

2 sec.

POWER PACK LIFE

MODE

DURATION

LUMENS

HIGH

1 hr

700

MEDIUM

1.5 hrs

400

LOW

3.5 hrs

200

DIM

6.75 hrs

*Power Pack life may vary according to age and ambient conditions.

The Charge Indicator will turn green

once fully charged.

Charging time is about 2.5 hours.

Do NOT leave Power Pack charging

for extended periods of time.

When disassembled, keep both ends

dry and away from water.

FOR MORE INFO VISIT

FOXFURY .COM/RUGO

6/2017