Foxfury Lighting Solutions SUNBOLT Istruzioni per l'uso

Sfoglia online o scarica il pdf Istruzioni per l'uso per Riflettore Foxfury Lighting Solutions SUNBOLT. Foxfury Lighting Solutions SUNBOLT 2. Led spotlight

Stampa la pagina

SUNBOLT LED SPOTLIGHT

OPERATING INSTRUCTIONS

200-1006

Sunbolt 6 - 18°

200-1008

Sunbolt 6 Tac - 8°

200-1009

Sunbolt 6 Tac-Strobe 8°

The SUNBOLT Spotlight is a powerful

spot/search light. Key features include:

•

Fully submersible to 24 ft / 7 m

•

Instantly turns on to Low Light Level

•

Minimal Projected Heat, and no warm

up/cool down is needed

IMPLEMENTATION

1. Unit mounts on a standard ¾" inch

diameter post.

2. Turn Diamond Knob clockwise to secure to

post.

3. Turn Diamond Knob on side of head

counter-clockwise to loosen brake, holding

the back of the unit by the handle.

4. Adjust up/down and tighten brake

clockwise.

POWER SOURCE: AC Power Supply

•

Dimensions: 12" x 8" x 5" (305 x 203 x 127

mm)

•

100 – 240 VAC 50/60 Hz Power Supply

•

220 Watt Power Consumption

•

Power Switch

•

On LED Indicator

•

Dimming Knob

•

Insert keyed connector on Power Supply,

and secure by turning ring cap clockwise

(below)

OPERATIONAL MODES

The SUNBOLT Spotlight can cycle through -3-

Operational Modes, by pushing the black rubber

button switch at the center-top of the Power

Source.

All Sunbolt Models will automatically turn on in

Low Mode. Modes are as follows:

Mode

Light Output

Low

Medium

High

Please see the two DMX connectors for external

control.

P/N 200-1009 ONLY:

Pressing one more time (after High Mode) will

activate the FoxFury Turbo Strobe mode.

NOTE: This mode may induce vertigo. Prolonged

exposure has shown to cause vomiting as well.

Foxfury SUNBOLT Inst Manual 12 11

3,000 Lumen

7,000 Lumen

11,000 Lumen