DSC TL280R Manuale di installazione - Pagina 5

Sfoglia online o scarica il pdf Manuale di installazione per Telefono cellulare DSC TL280R. DSC TL280R 16. Internet alarm communicator - international
Anche per DSC TL280R: Manuali di installazione (17 pagine), Manuale di installazione (16 pagine)

Stampa la pagina

Communicator Installation Configuration

EN50131-1 Installation Requirements

For EN50131-1 compliant installations, the following programming options shall be set as described.

Supervision Heartbeat (required for ATS4 and ATS5):

• [851][004] set to 0087h (135s heartbeat).

NOTE: The compatible receiver at ARC location shall have supervision window programmed for

1800s (ATS4) or 180s (ATS 5).

• [851][005] options 1 and 3 shall be enabled

Test transmission (required for ATS3):

• [851] System test options [026] and [027] shall be enabled (FF) for the communication paths

available.

• [851][124] and [125] shall be programmed with time of day for test transmission and 1440 min-

utes (24h) for test transmission cycle

Configuration of communication paths (all ATS classes)

• [300][001] select option 02 for auto routing (this will allow transmission of the events over all

available communication paths in the system)

• [380] enable option 5 (YES) for parallel transmission over all available communication paths

(if redundant configuration is desired)

• [382] enable option 5 (YES) this will enable Alternate communicator

• [384] enable the desired back-up configuration (receiver 2 back-up for receiver 1 or receiver 3

back-up for receiver 1).

Technical Specifications, Ratings and Compatibility

Table 1: Communicator Ratings

Model

Power Supply Ratings

Input Voltage

Current Consumption

Current

Environmental Specifications

Operating Temperature

Humidity

Mechanical Specifications

Board Dimensions (mm)

Weight (grams) with bracket

Table 2: Compatible Receivers, and Panels

Communicator

TL280

NOTE: Enter [*][8][Installer Code][900] at keypad to view the panel version number.

OMMUNICATOR

This Ethernet Communicator shall be installed by service persons only (service person is defined

as a person having the appropriate technical training and experience necessary to be aware of haz-

ards to which that person may be exposed to in performing a task and can also take measures to

minimize the risks to that person or other persons). The Communicator shall be installed and used

within an environment that provides the pollution degree max 2, overvoltages category II, in non-

Receiver/

Panel

• Sur-Gard System I Receiver, version 1.13+

• Sur-Gard System II Receiver, version 2.10+

Receiver

• Sur-Gard SG-DRL3-IP, version 2.30+ (for Sur-Gard System III Receiver)

• Sur-Gard SG-DRL4-IP version 1.20+ (for Sur-Gard System IV Receiver)

• Sur-Gard SG-DRL5-IP version 1.00+ (for Sur-Gard System 5 Receiver)

• HS2016

• HS2032

Panel

• HS2064

• HS2128

NSTALLATION

Internet Alarm Communicator Installation Guide

10.8-12.5 VDC. Power is supplied from the panel's PC-Link header

or a PCL-422 module in remote cabinet installations. In remote cabi-

net installations, the PCL-422 module located with the communica-

tor is powered by either an HSM2204 or an HSM2300. Refer to the

PCL-422 installation instructions for details.

5% ~ 93% relative humidity, non-condensing

Description

TL280(R)

100mA @ 13.66V

-10°C to 55°C

100 × 150 × 15

290

ONFIGURATION