DSC Escort5580 Voice Assisted Security Control Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Unità di controllo DSC Escort5580 Voice Assisted Security Control. DSC Escort5580 Voice Assisted Security Control 17. Voice assisted security control

DSC Escort5580 Voice Assisted Security Control Manuale d'uso

Disarming The System

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
If you return to the premises and find that an alarm has occurred while you were away, it is
possible that an intruder may still be on the premises. Do not enter the premises. Go to the
nearest telephone and contact the authorities.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
How to Disarm the System
To disarm your security system, access the security system using the steps described in the
Accessing Your Security System section of this manual.
Select a Partition to disarm as described in the Accessing Partitions section of this manual.
If the selected partition is armed, the system will announce
Enter your Access Code, and the system will announce
If there were no alarms while the system was armed, the system will announce
When the system is disarmed, additional messages may be announced to advise you of the status of
the system, or to allow you to select other partitions.
If An Alarm Sounds
• Fire Alarm
Your installer will inform you if fire detection equipment has been installed and activated on your
system.
Fire alarms will sound with a pulsing tone. If a fire alarm sounds, follow your emergency evacuation
plan immediately. Refer to the guidelines for family escape planning at the back of this manual.
• Intrusion Alarm
Intrusion alarms will sound with a continuous tone.
If an intrusion alarm sounds, an intruder may be on the premises. Go to a safe place immediately.
If you are certain that the premises are safe, the alarm may be silenced from the telephone.
Access the security system using the steps described in the Accessing Your Security System and
Accessing Partitions sections of this manual.
IMPORTANT
"{System} is on. To turn off, enter your Access Code"
"{System} is on. To turn off, enter your Access Code"
"{System} is on. To turn off, enter your Access Code"
"{System} is on. To turn off, enter your Access Code"
"{System} is on. To turn off, enter your Access Code"
"Turning {System} off"
"Turning {System} off"
"Turning {System} off"
"Turning {System} off"
"Turning {System} off"
"No alarms in memory"
"No alarms in memory"
"No alarms in memory"
"No alarms in memory"
"No alarms in memory"
5