DSC PC5200 Istruzioni per l'installazione - Pagina 2

Sfoglia online o scarica il pdf Istruzioni per l'installazione per Unità di controllo DSC PC5200. DSC PC5200 2. Power supply module

Stampa la pagina

DSC PC5200 Istruzioni per l'installazione

LIMITED WARRANTY

Digital Security Controls warrants that for a period of twelve months from the date of pur-

chase, the product shall be free of defects in materials and workmanship under normal use

and that in fulfilment of any breach of such warranty, Digital Security Controls shall, at its

option, repair or replace the defective equipment upon return of the equipment to its factory.

This warranty applies only to defects in parts and workmanship and not to damage incurred

in shipping or handling, or damage due to causes beyond the control of Digital Security

Controls such as lightning, excessive voltage, mechanical shock, water damage, or damage

arising out of abuse, alteration or improper application of the equipment.

The foregoing warranty shall apply only to the original buyer, and is and shall be in lieu of

any and all other warranties, whether expressed or implied and of all other obligations or lia-

bilities on the part of Digital Security Controls. This warranty contains the entire warranty.

Digital Security Controls neither assumes responsibility for, nor authorizes any other person

purporting to act on its behalf to modify or to change this warranty, nor to assume for it any

other warranty or liability concerning this product. In no event shall Digital Security Controls

be liable for any direct or indirect or consequential damages, loss of anticipated profits, loss

of time or any other losses incurred by the buyer in connection with the purchase, installa-

tion or operation or failure of this product.

Warning: Digital Security Controls recommends that the entire system be completely tested

on a regular basis. However, despite frequent testing, and due to, but not limited to, criminal

tampering or electrical disruption, it is possible for this product to fail to perform as expected.

IMPORTANT - READ CAREFULLY: DSC SOFTWARE PURCHASED WITH OR

WITHOUT PRODUCTS AND COMPONENTS IS COPYRIGHTED AND IS PUR-

CHASED UNDER THE FOLLOWING LICENSE TERMS:

This End-User License Agreement ("EULA") is a legal agreement between You (the com-

pany, individual or entity who acquired the Software and any related Hardware) and Digital

Security Controls, a division of Tyco Safety Products Canada Ltd. ("DSC"), the manufacturer

of the integrated security systems and the developer of the software and any related products

or components ("HARDWARE") which You acquired. If the DSC software product ("SOFT-

WARE PRODUCT" or "SOFTWARE") is intended to be accompanied by HARDWARE, and is

NOT accompanied by new HARDWARE, You may not use, copy or install the SOFTWARE

PRODUCT. The SOFTWARE PRODUCT includes computer software, and may include asso-

ciated media, printed materials, and "online" or electronic documentation. Any software

provided along with the SOFTWARE PRODUCT that is associated with a separate end-user

license agreement is licensed to You under the terms of that license agreement.

By installing, copying, downloading, storing, accessing or otherwise using the SOFTWARE

PRODUCT, You agree unconditionally to be bound by the terms of this EULA, even if this

EULA is deemed to be a modification of any previous arrangement or contract. If You do not

agree to the terms of this EULA, DSC is unwilling to license the SOFTWARE PRODUCT to

You, and You have no right to use it.

SOFTWARE PRODUCT LICENSE

The SOFTWARE PRODUCT is protected by copyright laws and international copyright trea-

ties, as well as other intellectual property laws and treaties. The SOFTWARE PRODUCT is

licensed, not sold.

1. GRANT OF LICENSE This EULA grants You the following rights:

(a) Software Installation and Use - For each license You acquire, You may have only one

copy of the SOFTWARE PRODUCT installed.

(b) Storage/Network Use - The SOFTWARE PRODUCT may not be installed, accessed, dis-

played, run, shared or used concurrently on or from different computers, including a work-

station, terminal or other digital electronic device ("Device"). In other words, if You have

several workstations, You will have to acquire a license for each workstation where the SOFT-

WARE will be used.

may only have one copy per license installed at any given time. You may use the back-up

copy solely for archival purposes. Except as expressly provided in this EULA, You may not

otherwise make copies of the SOFTWARE PRODUCT, including the printed materials accom-

panying the SOFTWARE.

2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS

(a) Limitations on Reverse Engineering, Decompilation and Disassembly - You may not

reverse engineer, decompile, or disassemble the SOFTWARE PRODUCT, except and only to

the extent that such activity is expressly permitted by applicable law notwithstanding this

limitation. You may not make any changes or modifications to the Software, without the writ-

ten permission of an officer of DSC. You may not remove any proprietary notices, marks or

labels from the Software Product. You shall institute reasonable measures to ensure compli-

ance with the terms and conditions of this EULA.

(b) Separation of Components - The SOFTWARE PRODUCT is licensed as a single product.

Its component parts may not be separated for use on more than one HARDWARE unit.

the SOFTWARE PRODUCT is licensed with the HARDWARE as a single integrated product. In

this case, the SOFTWARE PRODUCT may only be used with the HARDWARE as set forth in

this EULA.

(d) Rental - You may not rent, lease or lend the SOFTWARE PRODUCT. You may not make it

available to others or post it on a server or web site.

(e) Software Product Transfer - You may transfer all of Your rights under this EULA only as

part of a permanent sale or transfer of the HARDWARE, provided You retain no copies, You

transfer all of the SOFTWARE PRODUCT (including all component parts, the media and

printed materials, any upgrades and this EULA), and provided the recipient agrees to the

terms of this EULA. If the SOFTWARE PRODUCT is an upgrade, any transfer must also

include all prior versions of the SOFTWARE PRODUCT.

(f) Termination - Without prejudice to any other rights, DSC may terminate this EULA if You

fail to comply with the terms and conditions of this EULA. In such event, You must destroy all

copies of the SOFTWARE PRODUCT and all of its component parts.

(g) Trademarks - This EULA does not grant You any rights in connection with any trademarks

or service marks of DSC or its suppliers.

3. COPYRIGHT - All title and intellectual property rights in and to the SOFTWARE PRODUCT

(including but not limited to any images, photographs, and text incorporated into the SOFT-

WARE PRODUCT), the accompanying printed materials, and any copies of the SOFTWARE

PRODUCT, are owned by DSC or its suppliers. You may not copy the printed materials

accompanying the SOFTWARE PRODUCT. All title and intellectual property rights in and to

the content which may be accessed through use of the SOFTWARE PRODUCT are the prop-

erty of the respective content owner and may be protected by applicable copyright or other

intellectual property laws and treaties. This EULA grants You no rights to use such content.

All rights not expressly granted under this EULA are reserved by DSC and its suppliers.

4. EXPORT RESTRICTIONS - You agree that You will not export or re-export the SOFTWARE

PRODUCT to any country, person, or entity subject to Canadian export restrictions.

5. CHOICE OF LAW - This Software License Agreement is governed by the laws of the Prov-

ince of Ontario, Canada.

6. ARBITRATION - All disputes arising in connection with this Agreement shall be deter-

mined by final and binding arbitration in accordance with the Arbitration Act, and the parties

agree to be bound by the arbitrator's decision. The place of arbitration shall be Toronto,

Canada, and the language of the arbitration shall be English.

7. LIMITED WARRANTY

(a) NO WARRANTY - DSC PROVIDES THE SOFTWARE "AS IS" WITHOUT WARRANTY. DSC

DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT

OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE.

(b) CHANGES IN OPERATING ENVIRONMENT - DSC shall not be responsible for problems

caused by changes in the operating characteristics of the HARDWARE, or for problems in the

interaction of the SOFTWARE PRODUCT with non-DSC-SOFTWARE or HARDWARE PROD-

UCTS.

EVENT, IF ANY STATUTE IMPLIES WARRANTIES OR CONDITIONS NOT STATED IN THIS

LICENSE AGREEMENT, DSC'S ENTIRE LIABILITY UNDER ANY PROVISION OF THIS LICENSE

AGREEMENT SHALL BE LIMITED TO THE GREATER OF THE AMOUNT ACTUALLY PAID BY

YOU TO LICENSE THE SOFTWARE PRODUCT AND FIVE CANADIAN DOLLARS (CAD$5.00).

BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIA-

BILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY

NOT APPLY TO YOU.

(d) DISCLAIMER OF WARRANTIES - THIS WARRANTY CONTAINS THE ENTIRE WARRANTY

AND SHALL BE IN LIEU OF ANY AND ALL OTHER WARRANTIES, WHETHER EXPRESSED OR

IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR

A PARTICULAR PURPOSE) AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART

OF DSC. DSC MAKES NO OTHER WARRANTIES. DSC NEITHER ASSUMES NOR AUTHO-

RIZES ANY OTHER PERSON PURPORTING TO ACT ON ITS BEHALF TO MODIFY OR TO

CHANGE THIS WARRANTY, NOR TO ASSUME FOR IT ANY OTHER WARRANTY OR LIABILITY

CONCERNING THIS SOFTWARE PRODUCT.

(e) EXCLUSIVE REMEDY AND LIMITATION OF WARRANTY - UNDER NO CIRCUMSTANCES

SHALL DSC BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT

DAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE,

STRICT LIABILITY, OR ANY OTHER LEGAL THEORY. SUCH DAMAGES INCLUDE, BUT ARE

NOT LIMITED TO, LOSS OF PROFITS, LOSS OF THE SOFTWARE PRODUCT OR ANY ASSOCI-

ATED EQUIPMENT, COST OF CAPITAL, COST OF SUBSTITUTE OR REPLACEMENT EQUIP-

MENT, FACILITIES OR SERVICES, DOWN TIME, PURCHASERS TIME, THE CLAIMS OF

THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY. WARNING: DSC

recommends that the entire system be completely tested on a regular basis. However,

despite frequent testing, and due to, but not limited to, criminal tampering or electrical dis-

ruption, it is possible for this SOFTWARE PRODUCT to fail to perform as expected.

FCC COMPLIANCE STATEMENT

CAUTION: Changes or modifications not expressly approved by Digital Security Controls

could void your authority to use this equipment.

This equipment generates and uses radio frequency energy and if not installed and used

properly, in strict accordance with the manufacturer's instructions, may cause interference to

radio and television reception. It has been type tested and found to comply with the limits for

Class B device in accordance with the specifications in Subpart "B" of Part 15 of FCC Rules,

which are designed to provide reasonable protection against such interference in any resi-

dential installation. However, there is no guarantee that interference will not occur in a par-

ticular installation. If this equipment does cause interference to television or radio reception,

which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

• Re-orient the receiving antenna

• Relocate the alarm control with respect to the receiver

• Move the alarm control away from the receiver

• Connect the alarm control into a different outlet so that alarm control and receiver are on

different circuits.

If necessary, the user should consult the dealer or an experienced radio/television technician

for additional suggestions. The user may find the following booklet prepared by the FCC

useful: "How to Identify and Resolve Radio/Television Interference Problems". This booklet

is available from the U.S. Government Printing Office, Washington D.C. 20402, Stock #

004-000-00345-4.