DSC Power Series Manuale di riferimento

Sfoglia online o scarica il pdf Manuale di riferimento per Schermo tattile DSC Power Series. DSC Power Series 2. Neo image sensor
Anche per DSC Power Series: Manuale (18 pagine), Manuale di riferimento rapido (2 pagine), Manuale di installazione (14 pagine), Istruzioni per l'installazione (2 pagine), Manuale rapido (4 pagine), Manuale di istruzioni per l'installazione (11 pagine)

NEO HS2016 / HS2032 / HS2064 / HS20128 v1.3

Zone Attributes

The following information describes the zone attribute programming options. To modify the zone

attributes, first enter into Section [002] and then enter into the SubSection {001 – 128} (the 3

digit zone number.) After modifying the zone attributes as needed, press the # key and enter the

next zone number (SubSection) if additional zones need to be modified; or the # key a second

time to your solid red light.

Section [002] – Zone Attributes

Zone attributes are used to customize the operation of the independent zones. When a zone

type (Section [001]) is programmed, the default zone attribute is automatically assigned. See

the Reference Manual for the default attribute settings for each zone type.

Note: These attributes allow you to override the default settings. DO NOT change any fire zone

attributes from their default settings.

SubSection {001 – 128}

Note: The attributes listed below can be enabled and disabled for each zone independently.

01 – Bell Audible

ON: An alarm activates the siren.

OFF: Silent alarm.

02 – Bell Steady

ON: Siren output is steady when in alarm.

OFF: Siren output pulses when in alarm.

03 – Door Chime

ON: The keypad chimes when the zone is open and/or when the zone is secured.

OFF: The zone does not chime.

04 – Bypass Enabled

ON: The zone can be manually bypassed.

OFF: The zone cannot be bypassed.

Note: Bypass shall not be enabled for fire zones.

05 – Force Arm

ON: The system can be armed with the zone open. The zone is temporarily bypassed,

and when secured, is monitored by the system.

OFF: The system cannot be armed if the zone is open.

NEO – Zone Attributes

1 of 2

April 2018