DSE DK-AC1-HDS Manuale d'uso
Sfoglia online o scarica il pdf Manuale d'uso per Fotocamera digitale DSE DK-AC1-HDS. DSE DK-AC1-HDS 2. Camera with hidden video recorder
Stampa la pagina
USER'S MANUAL
DK-AC1-HDS
Camera with WiFi DVR
Product description
DK-AC1-HDS is a video recorder equipped with a camera
integrated in a fake pocket lighter.
1.
Led wifi indication
2.
LED flashlight power button
3.
Camera power button
4.
Target
5.
LED flashlight
5. Reset button
6.
MicroSD slot
7.
USB port
8.
Contact for the lighter button
Supply
The camera is able to operate with only the power supply
of its own 280mAh internal battery which allows about 45
minutes of autonomy. The battery is recharged by
connecting a power supply to the USB socket (not
included).
The LED (1) lights up during charging
Use as a lighter
In order not to arouse the slightest suspicion, this product
is a real electric resistance lighter, actually working. To
DK-AC1-HDS Camera with hidden video recorder
DSE srl - Digital Surveillance Equipment - www.dse.eu
Document: DK-AC1-HDS 2F1
activate the lighter, press and hold the power button and
the resistance will glow in a few seconds.
Obviously, the use of the lighter consumes electricity and
reduces the autonomy of the appliance.
The lighter is also equipped with an LED flashlight.
Movie storage
The video files are stored on a micro SD card (not
supplied). The movies have Full HD 1920x1080 resolution
at 25 f / sec. And they are saved in MP4 format with H264
compression
It is possible to use micro SD cards of any brand up to
128 GB of capacity.
1 hour of recording takes up 180MB on average, so over
700 hours of recording can be stored on a 128GB SD card.
Once the memory has run out, the DVR will automatically
overwrite the oldest files if programmed in this way in the
configuration.
The duration of the individual files is also programmable in
the configuration.
Inserting the micro SD card
The first thing to do, if you want to make recordings, is to
insert the micro SD card in the appropriate slot in the DVR
(6) which is revealed by extracting the head of the lighter.
It is possible to use micro SD cards with capacities up to
128 GB in CLASS 10 or higher.
A class 10 SD card has a write speed of 10 MB / s. Do not
use SD cards with slower speeds as they will lead to
malfunctions.
Pay attention to the direction of insertion of the SD card
which will slide into its seat only with the gold contacts
facing the USB socket. The slot for the slot is rather small
so it is recommended to use a pointed object, such as a
small screwdriver, to push the microSD card in until it
clicks into place.
No micro SD card is included in the package.
Charging the battery
Before using the device, it is advisable to fully recharge
the battery. To do this, connect the USB port of the DVR
to the computer or to a USB charger with the supplied
cable.
Full charging takes about 2 hours depending on the initial
charge state.
There is a green LED (1) which lights up during charging.
Turn on the device
DK-AC1-HDS is equipped with a power switch located in
the base (3). When turned on, the DVR does not emit any
visible signal except a LED (1) that flashes blue / red. The
LED is placed in such a position that it is visible only at
very close range.
To switch off, press and hold the button for 3 seconds.
To use the product, you need to use a smartphone or
tablet with the HDSmartIPC app.
Download HDSmartIPC and setup
DK-AC1-HDS
has
been
controlled via wifi with a mobile phone or tablet.
It is not necessary to have a wifi network to use DK-AC1-
HDS as the device is factory supplied in ACCCESS POINT
mode and generates a wifi network itself to which you can
connect with Android / iOS portable devices.
First you need to download the HDSmartIPC application
from Google Play or Apple Store, available for free for
Android and iOS.
For the use of the APP see the specific manual.
Page: 1
developed
to
be
remotely