DSE DK-V2M Manuale d'uso - Pagina 2
Sfoglia online o scarica il pdf Manuale d'uso per Fotocamera digitale DSE DK-V2M. DSE DK-V2M 5. Camera and video black box for cars
Stampa la paginaUSER MANUAL
The lighter cable supplied with the camera has a cable that is long
enough to be hidden along the rear window gasket and then
reaches the lighter socket by passing under the dashboard.
The camera is placed over the rear view mirror of the car using the
two rubber bands included
The front lens is mounted on an adjustable support that you can
adapt to your vehicle to get a perfect shot of the road.
The function of the original rearview mirror is replaced by the
dashcam so it is not possible to install this camera without
connecting the external rear view camera.
Most vehicles only supply power to the cigarette lighter with the
ignition on. In this case, the camera will turn on and off
automatically together with the vehicle panel.
Some vehicles supply power to the lighter constantly, even when
the vehicle is stationary. In this case
DSE srl - Digital Surveillance Equipment - www.dse.eu
DK-V2M Dash Cam Car Camera
you will have to turn the dashcam on and off manually with the
ON / OFF button (1).
Installation of the dashcam with power supply from the
fuse control unit
If you want to install the dashcam so that you do not have any
visible cables inside the vehicle, you can purchase our installation
kit separately, in theMiniUSB version, suitable for this dashcam,
The kit includes the cables and connectors to connect to the
vehicle's fuse box. It also includes a 12V / 5VDC transformer with
battery saver that is able to disconnect the dashcam when the
vehicle's battery begins to run out, a very useful function if you use
the dashcam with the vehicle stationary.
NOTE: This model supports cable connection
+ BAT (voltage always present) and also of the ACC cable (voltage
only with ignition on). If you connect both cables, the camera will
turn on and off automatically with the vehicle, but you can also
activate it at will when the vehicle is stationary for surveillance while
parked.
For the installation of the dashcam kit you can consult the specific
installation kit manual.
Installing the rear view camera
This dashcam is equipped with 2 cameras for front and rear
shooting.
The front camera is built into the dashcam, while the rear camera is
connected to the AV IN connector (3) with the cable provided and
positioned on the rear of the vehicle.
You can arrange the rear camera inside the vehicle, so that it
shoots through the rear glass (A), or mount the camera outside,
above the license plate (B), preferably having it installed by a
professional. The camera is perfectly waterproof and small in size.
Document: DK-V2M 2A2
Page: 2