DSG Technology Blaze Series Manuale di installazione rapida - Pagina 14

Sfoglia online o scarica il pdf Manuale di installazione rapida per Server DSG Technology Blaze Series. DSG Technology Blaze Series 20.

the

button to save.

7. Keep pressing the downward

button to exit.

NOTE: The IP Phone will automatically search and download the latest version of software from the Blaze

Server and then reboot with the latest version.

In DHCP Environment

If your LAN is under DHCP environment, you can skip the settings of IP address, Gateway IP and Subnet

Mask. Instead, you can move to "DHCP" setup item and enable this function.

1. Plug in the power cord of the IP phone and please DO NOT connect the IP phone to LAN.

2. After the system check, press and hold the middle

Input your password, if any. The default password is 1234.

3. You will see "EXT NUMBER" shown on the LCD screen. Press the

use the keypad to input the extension number assigned to the IP phone. Press the

to save.

4. Keep pressing the downward

start editing and then press the downward

button again to save.

5. Keep pressing the downward

button to start editing and use the keypad to input the IP address of your Blaze Server. Press the

button to save.

6. Keep pressing the downward

button to exit.

button until the LCD displays "EXIT SETUP". Press the

button until the LCD displays "DHCP." Press the

button to change the selection to "On" Press the

button until the LCD displays "PBX SERVER IP." Press the

button until the LCD displays "EXIT SETUP". Press the

button for 3 seconds to enter the setup menu.

button to start editing and

button again

button to