DSG Technology SH2500 Manuale di avvio rapido - Pagina 2
Sfoglia online o scarica il pdf Manuale di avvio rapido per Interruttore DSG Technology SH2500. DSG Technology SH2500 2. Switching hub
Stampa la paginaIntroduction
Key Features
24-port 10/100 Mbps supporting Auto-
Negotiation
Support Auto-MDI/MDI-X function
Support up to 24 port-based VLAN
Groups
Support Store-and-Forward packet
transmission technology
Console Port
The console port is used when you forget the Switch's IP address.
1. Connect one end of the RS232 Cable came with the product package to the COM
port on your PC, and the other end to the Console port on the Switch.
2. From your computer, run HyperTerminal program. Assign a name and set baud rate at
19200 bps.
3. Power off the Switch and then turn it on. The connection will be established automatically.
4. You can find the IP address of the Switch from the screen.
Support Non-blocking Function
Support IEEE802.3x Flow-control for Full-
duplex and Back Pressure Flow-control for
Half-duplex
Support 802.1p/Q
Support 802.3af Power-over-Ethernet
Web Based Management
Notice:
The RS232 cable came with the Switch
is a crossover cable. If you would like
to use the regular RS232 cable, please
switch pin 2/3, pin 4/6 and pin 7/8.
Power Socket
The Power Socket is designed to be used with the power cord included in the product package.
1. Attach the female end of the power cord to the male power connector on the back panel.
2. Attach the male end of the power cord to a grounded power outlet.
Cabling
Port Type
Cable Type
10BASE-T
Category 3 4 or 5 TP
100BASE-TX
Category 5 5e TP
Power-over-Ethernet
Category 5 5e TP
Status LED
The table below lists each LED's name, color and a brief description of its function.
Name
Color
Status
Description
PWR
Red
Lit
Power "On"
When the port has a valid physical connection with
Lit
another device. Speed 10Mbps.
Green
Blink
When the port is sending or receiving data (Activity).
Status
When the port has a valid physical connection with
Lit
another device. Speed 100Mbps.
Amber
Blink
When the port is sending or receiving data (Activity).
Lit
Full Duplex
Duplex
Green
Off
Half Duplex
Red
Lit
The port has PSD module and support power.
LED on
RJ45 Jack
Green
Lit
The port detects a PoE endpoint connection.
Connector
RJ-45
RJ-45
RJ-45