DSLR Pros Sundance HD Edition Aerial Kit Manuale d'uso - Pagina 9
Sfoglia online o scarica il pdf Manuale d'uso per Droni DSLR Pros Sundance HD Edition Aerial Kit. DSLR Pros Sundance HD Edition Aerial Kit 12. Sundance hd edition aerial kit contents list
Stampa la pagina12.
Using the DJI Lightbridge
Your HD kit comes with the DJI Lightbridge digital video downlink system. This system allows for
High Definition video to be transmitted to your ground station, allowing you to see what you are
shooting in Full HD on your smartphone or tablet device. To use the Lightbridge, you will need to
download the DJI Lightbridge App from the Googleplay App Store.
All instructions listed are meant only to supplement the information given in the DJI Lightbridge
manual included with your purchase. Please refer to your DJI Lightbridge Manual for more
information.
• Be certain that the air system antennas are fully plugged into the Lightbridge air system.
• Attach the HDMI cable from the Lightbridge to the HDMI port on your GoPro3.
• On the ground system, attach both antennas before pressing and holding the ground system power
button to start up the Lightbridge.
• Attach the remote controller cable from the back of the ground system to the back of the Futaba
transmitter.
• When controlling your craft through the Lightbridge ground system, turn off the RF function on
your transmitter by holding down the RTN button on your Futaba while pressing up on the power
button.
o Spin the touch wheel to select RF OFF on your Futaba and press RTN.
• Connect your smartphone or tablet device to the Lightbridge ground system via the USB port.
• Connect the Phantom 2 to your computer and open the P2 assistant software.
o Under the "Basic" tab, select RC.
o Move the control sticks on your Futaba transmitter to ensure that they are transmitting
properly.
• Start the DJI Lightbridge App with the GoPro and Phantom 2 powered on to see the HD image
being sent from your GoPro to your smart device.
The DJI Lightbridge App has three options for the transmitted video signal. These can be changed
in the Video Transmission Mode Settings page. Each mode has it's own advantages and it will be
up to the pilot to decide which mode is better for them in the moment.
• Real Time: This mode reduces video quality while improving the lag time and offering a greater
range.
It is recommended that you use the Balance(BAL)
setting when charging LiPo batteries.
DSLRPros 2600mAH LiPo battery is 2 Cell(2S) and
chargers at NO more than 2Amps.