ATS-TN SkyAngel 911FD Manuale d'uso

Sfoglia online o scarica il pdf Manuale d'uso per GPS ATS-TN SkyAngel 911FD. ATS-TN SkyAngel 911FD 2.

DEVICE CHARGING:

For the first time of use, please fully charge the unit for at least 2~3 hours

Using the USB charger or using docking station to charge

• Place the device on the docking station.

• Connect the Micro USB side of the cable to the docking station port and connect the other end of the

cable to the designated AC power source (USB/AC adaptor).

SWITCHING THE DEVICE ON AND OFF:

• To turn on the device: press the side power button for 1 second, all the LEDs will flash rapidly.

Device can be also turned on automatically by charging via USB or put it into the docking station.

• To turn off the device: press and hold the side button and SOS button together for 1 second until the

LEDs off.

WATERPROOF:

Your SkyAngel 911FD is 100% waterproof and can be briefly worn in the shower or even submerged under

water for short periods of time. Do not allow the device to be soaked for prolonged periods of time.

PLEASE NOTE: Do not remove the back cover at any time; this will break the waterproof seal. Also, removing

the back cover voids any and all warranties.

WHAT DO THE FLASHING LIGHTS ON THE SIDE OF THE UNIT MEAN?

Charging Status – Blue Light:

• Blue light is on solid: the unit is charging

• Blue light is blinking quickly: unit has less than 15% power and should be recharged

• Blue light very rarely flashes: unit is fully charged and has GPS satellite signal

Cellular Status – Green Light:

• Green light single flash every 3 seconds: unit is connected to a cellular network

• Green light very rapidly flashing: unit is contacting 911

User's Guide for the SkyAngel 911FD