AirTime ATX6 Manuale d'installazione e d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Ricetrasmettitore AirTime ATX6. AirTime ATX6 16. Wireless wall clock transceiver

Stampa la pagina
ATX6 Installation and User Guide
Date/Time Set-Up:
To enter the Date/Time Set-Up Mode, simultaneously press the
Center (NXT) and Right (SET) buttons for 1 second. You will see
the Password prompt: "P000". For each of the following
parameters to be set, the display will show the parameter
number in the two left digit positions, and the parameter value
in the two right digit positions. The parameters are as follows:
P
Awaiting Password
(000 ~ 999)
If you have not previously changed the password, press the SET
button to continue [Default Password is '000']. If you have
previously changed the Password, enter the value using the INC,
NXT and SET buttons. The INC button will increment the digit
over the displayed cursor. The NXT button will move the cursor
to point to the next digit. The SET button will enter your final
selection. If correct, the display will advance to enter the first
set-up parameter.
If incorrect, an "Err" message will be displayed. Press the Set
button to re-enter your password. Press Inc or Next to abort the
setup.
1
Month
(01 ~ 12)
Use the INC button to advance through the values. Press the SET
button when the correct value is displayed.
2
Date
(01 ~ 31)
Use the INC button to change the first digit. Press NXT to move
the cursor to the next digit, then press INC to change the
selected digit. Press the SET button when the correct value is
displayed.
If an incorrect value is entered "Err2" will be displayed. Press
the Set button and reenter the date
3
Year
(00 ~ 99)
Use the INC button to change the value of the first digit. Press
NXT to move the cursor to the next digit, then press INC to
change the selected digit. Press the SET button when the correct
value is displayed.
Page 7
Wiring Diagrams
Synchronizing the ATX6 to Lathem's AirTime
TimeSync Software via Ethernet to RS232 Converter
(Program Synchronization "PcL")
Synchronizing the ATX6 to the ATX6-GPS Receiver
(Program Synchronization "GPS")
ATX6 Installation and User Guide
Page 20