ATSI LST-650 Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di prova ATSI LST-650. ATSI LST-650 10. Nema load switch tester

Service and Calibration

Note: The LST-650 has no user serviceable parts.

Under no circumstances should the user attempt to open the enclosure. If the Tester appears to be

malfunctioning, contact ATSI to make arrangements for repair. See the Limited Warranty and Liability

section of this manual for details.

Note: ATSI strongly recommends that each tester be calibrated annually.

An annual calibration will verify that your Tester is operating within the original manufacturers

specifications and provide you with a detailed calibration report for documentation.

Please visit

www.atsi-tester.com

plans.

When shipping your Tester back to ATSI for annual calibration or service, proper packing will help insure

that the Tester arrives without damage.

Preparing Your Tester for Shipment

● It is highly recommended to keep the original shipping box and foam for use when shipping the Tester

back to ATSI.

● If the original packing materials are not available, place the Tester inside of a large cardboard box with at

least two inches of cushioning on all sides.

● UPS recommends a MINIUMUM of two inches of cushioning on all sides of the box. If UPS determines

the package was insufficiently packed, they will not pay for damages.

● Fill out the Equipment Service and Calibration form at

LST-650 User's Manual v1

for the latest pricing of calibration services and extended maintenance

www.atsi-tester.com

Page 8 of 10