DSPeaker Anti-Mode X2 Manuale d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso per Hardware di rete DSPeaker Anti-Mode X2. DSPeaker Anti-Mode X2 12.

Recycling information

Anti-Mode

X2 is marked according to the Waste Electrical and Electronic

Equipment Directive. There are take-back systems in place that help to preserve

nature and natural resources when products are disposed of appropriately. If you

need to dispose of this product, use the take-back system that has dedicated

collection facilities for electronic equipment. Do not put the product into household

waste disposal!

Anti-Mode

X2 is manufactured using parts and processes that follow the EU directive of the Restriction of the

use of certain Hazardous Substances in Electrical and Electronic Equipment (RoHS).

Safety Instructions

➢ The unit shall not be exposed to dripping or splashing of liquids and no objects filled with liquids

should be placed on the unit.

➢ Anti-Mode

X2 has been designed for normal indoor use. Use of the device outdoors, in humid or other

extreme environments, may cause reduced performance.

➢ Anti-Mode

X2 is intended to be used with cables of up to 3m in length. With longer cables, observe

electrostatic discharge precautions when connecting or disconnecting them to avoid damage to

equipment. Longer cables may also be susceptible to electromagnetic interference.

➢ CAUTION: The remote control contains two AAA batteries. Only replace it with the same type and in

the correct orientation!

WARNING: Do not ingest battery, Chemical Burn Hazard!

Keep batteries out of reach of children and dispose of the used battery appropriately. If a

battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to

death. If you think batteries might have been swallowed or placed inside any part of the

body, seek immediate medical attention

If the battery compartment does not close securely, stop using the remote control and keep

it away from children.

➢ When the unit is in stand-by mode, the display is turned off.

➢ CAUTION: The power supply shipped with the unit is 12VDC 1.6A with 2.1mm/5.5mm connector,

center positive. Only connect power supplies with specifications of 12VDC and 0.6A or higher.