ATTA Freedom Fill Istruzioni per l'installazione - Pagina 6
Sfoglia online o scarica il pdf Istruzioni per l'installazione per Automobile Accessories ATTA Freedom Fill. ATTA Freedom Fill 10. Auxiliary system
Anche per ATTA Freedom Fill: Manuale di risoluzione dei problemi (5 pagine)
Stampa la pagina14. The BLUE wire will splice into the Factory Sending Unit Wire. To ensure proper reading, attach the
blue wire as close to the top of the factory sending unit as possible. (Going from the inboard side of the
factory tank, it is possible to feel the factory wiring harness. Pull the factory harness towards you to
attach the BLUE wire to the factory sending unit wire).
Purple-04-14 GM/Chevrolet
Blue w/ Purple Strip 2015+ Gm/Chevrolet
Yellow with purple stripe-2008-current Ford (May have multiple same color wire in harness. Correct wire will have voltage –
Incorrect wire will have no voltage)
Yellow with white stripe 88 to 07 Ford front tank
Blue with black stripe 03 to 05 Dodge
Blue with white stripe-98-02 & 06-Current Dodge (May have multiple same color wire in harness. Incorrect wire will be
wrapped around another wire)
(See owner's manual due to variations of truck wiring).
15. The long YELLOW wire from the gauge & switch will connect to the YELLOW wire from the
Auxiliary Tank. The GREEN wire from the auxiliary tank needs to be connected to chassis ground.
When the system is turned on, the Freedom Fill Controller box will sense when the factory tank is
approximately at a half a tank, the controller box will then turn the auxiliary in-line pump on, filling the
factory tank to approximately three-quarters of a tank. The light on the switch will turn on allowing you to
know when the system is transferring fuel. When the factory tank reaches approximately three-quarters of a
tank, the pump will then turn off. When the auxiliary tank is empty, the system will not turn on. If the
factory tank goes below approximate one-half of a tank, you know the auxiliary tank is empty. When the
switch is in the off position, the auxiliary gauge and computer will be off, and will not transfer fuel from the
auxiliary tank to the factory tank.
When the truck or the system first turns on, the pump &light will turn on for approx 5 seconds, then turn
off. If the factory tank needs fuel it will then turn back on and begin to transfer fuel. If the factory tank is
above approx ½ a tank, the system will remain off until the factory tank reaches the appropriate level of
approx ½ a tank. If the truck or Freedom Fill System is shut off during fuel transfer, it will not turn back on
until the factory tank reaches approx half a tank.
Please visit our website at www.attatank.com for latest updates and warranty information.
Need trouble shooting tips, please visit: http://www.attatank.com/freedom-fill-troubleshoot/
Return warranty card within thirty (30) days of installation to activate your
warranty.
How the System Works
6