3ntr A4 V2 Manuale di avvio rapido - Pagina 15

Sfoglia online o scarica il pdf Manuale di avvio rapido per Stampanti 3D 3ntr A4 V2. 3ntr A4 V2 20. 3ntr a4 v2 3d printer quick start

Loading filament (during print)
When the filament spool is depleted, the loading of a new one is a quite easy
process:
1. Prepare the new spool to be loaded, be sure it is the same polymer you
are currently using
2. On the front panel, navigate with the jog wheel to TUNE->CHANGE
FILAMENT OPTION: pressing once on the jog wheel black button will
unload for you the current filament, while parking the print head away
from the part being printed.
3. Release the feed mechanism of the selected extruder, pulling the handle
on the back of the printer. Lock it open and remove the used filament.
4. Remove the old spool, and replace it with the new one
5. Use a scissor or suitable tool (a small pencil sharpener could work with
"soft" polymers) to make a dart-like point on new filament end
6. Feed the new filament up the mechanism and clear PTFE tubing until
you reach the extruder part.
7. Gently push until you see some polymer exiting from the nozzle. Remove
and clean the extruder nozzle tip
8. Release the feeding device lock
9. Push on the black button: printing will resume.
10. That's it!